Newlec Socket Converter - 2 Gang to 3 Gang - 13 Amp

For most users comfortable with basic DIY and electrical safety precautions (like turning off power at the source), this converter can be installed without an electrician. However, if you are unsure at any stage, it is always best to consult a qualified professional.

The converter is rated at 13 Amps. For a 230V system, this equates to a maximum total power of approximately 2990 Watts (230V x 13A). However, you must ensure that the total load across all devices plugged into the converter does not exceed the capacity of your home's electrical circuit.

This converter is designed to fit over an existing 2-gang socket back box. It is not designed to replace a single socket. You would need a different product if starting from a single socket.

Yes, each of the three sockets on this converter is individually switched, allowing you to control power to each outlet separately.

The dimensions are approximately 210mm wide x 90mm tall x 25mm deep. The fixing centres are 120.6mm.

The Newlec Socket Converter conforms to BS 1363, the relevant British safety standard for 13A plugs, socket-outlets, and adaptors.

Verify that your existing wall box has the standard 120.6mm fixing centres as specified. Ensure no obstructions are preventing the converter from seating correctly. Use the provided long screws.

Ensure the mains power is on. Check that the individual switch for that socket is in the 'ON' position. If the problem persists, turn off the power and check wiring connections (if applicable) or consult a qualified electrician.

This indicates an overload on the circuit. Reduce the number of high-power appliances connected simultaneously or distribute them across different circuits. Consult an electrician if the issue persists with minimal load.

Turn off the mains power. Gently operate the switches. If the issue continues, it may indicate a manufacturing defect. Contact the retailer or manufacturer.