Best current price£5.02from eBay
Shopping.co.uk recommended and popular offers
eBay£5.02Visit shop Mirka Abralon 150mm 6"" P600 Grit 1x HookNLoop Foam Fine Finishing Discs Pad
Visit shop4 offers from £5.02 - £10.86
View price history by clicking the chart icon.
The Mirka Abralon 150mm P600 grit sanding disc is designed for professionals and hobbyists who require a high-quality, consistent finish on painted or smooth surfaces. Its primary benefit is the unique foam backing, which excels at achieving uniform surface preparation by distributing pressure evenly; however, users should note that as a fine-grit finishing pad, it is intended for smoothing and blending rather than aggressive material removal.
| Model Part Number | 8A24102061 |
|---|---|
| Brand | Mirka |
Yes, Abralon discs are designed to handle both dry and wet sanding applications.
Yes, provided your sander uses a standard hook-and-loop (Velcro-style) backing pad.
Typically, you might use a P400 grit beforehand for leveling, and follow up with a P800 or P1000 for finer smoothing.
Longevity depends on the material being sanded and pressure used, but the foam construction typically lasts longer than paper-based abrasives.
While it can be used on metal, it is specifically optimized for finishing paints and composites.
Check the hook-and-loop backing plate for accumulated dust or worn-out hooks. Clean the plate or replace if necessary.
Ensure you are using even, light pressure and that the disc is lying perfectly flat against the surface. Do not tilt the sander.
Use a vacuum extraction system with your sander or periodically clear the disc surface with compressed air.
To set up, simply align the hook-and-loop backing of the Abralon disc with your 150mm random orbital sander pad and press firmly to secure. Ensure the machine is turned off during attachment. Regarding compatibility, this disc is designed for standard 150mm backing plates. For care, avoid using excessive force, as this can degrade the foam backing and lead to premature wear. After use, gently tap or use compressed air to remove sanding dust from the disc face to maintain its cutting efficiency. Store in a cool, dry environment to prevent the adhesive layer from degrading.
