Starbrite Cleaner Wax - 500Ml

Yes, this cleaner wax is suitable for fibreglass and gelcoat surfaces, effectively removing oxidation and providing protection.

The frequency depends on environmental conditions and usage, but typically, applying it 2-3 times per season provides optimal protection and shine.

It is designed for fibreglass and painted surfaces. However, for custom or delicate paint jobs, it is always recommended to test in an inconspicuous area first.

PTEF polymers create a durable, slick barrier on the surface that shields against UV rays, salt, environmental wear, and makes cleaning easier.

It is best to avoid applying the wax in direct sunlight or on a hot surface. Apply in the shade to prevent premature drying and streaking.

If residue is difficult to remove, try using a clean microfiber towel that is slightly dampened with water. Ensure the surface is completely dry before applying another light coat if needed.

The surface may have been too hot during application, or too much product was used. Ensure application is done in the shade on a cool surface and use a lighter coat. Try buffing with a clean, dry microfiber towel, possibly slightly damp if residue persists.

For heavy oxidation, multiple applications may be necessary. Ensure firm, consistent pressure during the cleaning phase. Consider using a more aggressive cleaner if oxidation is severe, followed by the Starbrite wax for protection.

This could indicate the product was applied too thickly or not allowed to haze properly before buffing. Ensure a thin, even coat and adequate drying time. Buff thoroughly with a clean cloth.