Igenix 60cm Curved Glass Chimney Cooker Hood - Silver - A

The Igenix 60cm Curved Glass Chimney Cooker Hood has an extraction rate of 337.3 m³/h.

Yes, it can be configured for recirculating use, but you will need to purchase the optional Igenix carbon filter (IGCF03394B) separately.

It is recommended to clean the grease filters regularly, ideally after every few uses or at least once a month, depending on your cooking habits.

This cooker hood is rated 'A' for energy efficiency, with an estimated annual consumption of 20 kWh.

The maximum noise level is 64 dB, which occurs at the highest speed setting.

The cooker hood is finished in a silver stainless steel with a curved glass canopy.

No, the carbon filter (IGCF03394B) is an optional accessory and must be purchased separately if you intend to use the hood in recirculating mode.

Check that the unit is switched on and a speed setting is selected. Ensure the grease filters are clean and not blocked. Verify that any ducting is clear and not kinked, or if recirculating, that the carbon filter is correctly installed and not overdue for replacement.

Ensure the hood is powered on. If the light still fails to illuminate, the LED bulb may need replacing. Consult the user manual for specific instructions on bulb replacement.

Verify that the cooker hood is securely mounted to the wall. Ensure all filters are correctly seated. If the noise persists, especially at higher speeds, it might indicate a motor issue or a blockage in the ducting. Contact customer support if problems continue.

Clean the grease filters more frequently. Wipe down the exterior and interior surfaces of the hood regularly with a suitable degreaser and a soft cloth.