Shopping.co.uk

Plumbright Endfeed Male Elbow - 15mm x 1/2"

Plumbright Endfeed Male Elbow - 15mm x 1/2"

The Plumbright Endfeed is used for joining two lengths of copper pipe with the same diameter to cr...

Best current price£4.56from City Plumbing GB

Best offers

Shopping.co.uk recommended and popular offers

One Offer

1 offer from £4.56

View price history by clicking the chart icon.

City Plumbing GBPlumbright Men's Endfeed Elbow 90 Degree 15Mm X 1/2" 900002
Free delivery in 1–3 days
£4.56
Visit shop

Product Information

Full details

This guide provides essential information for using the Plumbright Endfeed Male Elbow. Ideal for both professional plumbers and DIY enthusiasts, this fitting allows for a secure 90-degree turn in 15mm copper pipework when connecting to a 1/2" fitting. Note that proper soldering and pipe preparation are crucial for a watertight seal.

All features

Model Part NumberPRELB90221
BrandPlumbright

Extended Product Information

FAQs

What tools are required for installation?

You'll need a pipe cutter, deburring tool, wire brush or emery cloth, flux, solder, and a blowtorch.

Can I use this fitting with other types of pipe?

This fitting is designed for use with 15mm copper pipe only. Always check compatibility.

How do I ensure a watertight seal?

Properly clean and prepare the pipe and fitting, apply flux, and ensure the solder flows completely around the joint.

What type of solder should I use?

Use solder specifically designed for plumbing applications.

Can I reuse this fitting?

It is generally not recommended to reuse endfeed fittings once soldered.

How do I remove an existing fitting?

Heat the fitting with a blowtorch to melt the solder and carefully remove the fitting.

What is the correct temperature for soldering?

Heat the fitting and pipe until the solder melts and flows into the joint. Follow the solder manufacturer's instructions.

Troubleshooting

Joint leaks after soldering.

Ensure the pipe and fitting were properly cleaned and fluxed. Re-solder the joint, ensuring complete solder penetration.

Solder not flowing properly.

Ensure sufficient heat is applied and that flux is properly applied to both the pipe and fitting.

Difficulty inserting pipe into fitting.

Check for burrs on the pipe end. Clean the inside of the fitting and apply more flux.

Pros and Cons

Pros

  • Creates a secure and leak-proof joint when properly installed.
  • Provides a neat and compact solution for changing pipe direction.
  • Compatible with a wide range of standard plumbing components.
  • Durable and long-lasting construction.
  • Easy to install with proper tools and techniques.

Cons

  • Requires soldering skills and equipment for installation.
  • Potential for leaks if not soldered correctly.
  • Requires careful measurement and alignment during installation.
  • Not suitable for use with certain pipe materials other than copper.
  • May require additional fittings for specific applications.

Setup, Compatibility & Care

  1. Preparation:
  • Ensure the copper pipe is cut squarely and deburred.
  • Clean the pipe and fitting with a wire brush or emery cloth.
  • Apply flux to both the pipe and fitting.
  1. Assembly:
  • Insert the pipe into the fitting.
  • Heat the joint with a blowtorch, ensuring even heat distribution.
  • Apply solder to the joint, allowing it to flow into the gap.
  1. Cooling & Inspection:
  • Allow the joint to cool completely.
  • Wipe away any excess solder.
  • Inspect the joint for leaks.

Compatibility: Compatible with 15mm copper pipe and 1/2" threaded fittings. Ensure compatibility with other components.

Care: Regularly inspect for leaks and ensure proper support of pipework.

Price History

DatePrice
Visit shop