D-C-Fix Self-Adhesive Vinyl Film - 90Cm X 3M

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£23.97from B&Q

One Offer

1 offer from £23.97

View price history by clicking the chart icon.

B&QB&Q - Marble Cortes Brown 90Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£23.97
Visit shop

Product Information

Full details

The D-C-Fix Self-Adhesive Vinyl Film is designed for homeowners and renters looking to refresh surfaces like kitchen countertops, tabletops, and furniture on a budget. Its key benefit is providing a quick, mess-free, and affordable way to update your space with realistic woodgrain or marble effects. A primary consideration is its heat resistance limit of 70°C, requiring the use of worktop savers for hot items.

All features

Model Part Number90Cm X 3M
Brandd-c-fix

Extended Product Information

FAQs

Can I reposition the vinyl if I make a mistake?

Yes, the water-based adhesive allows you to lift and re-apply the film during the application process if you make a mistake. Ensure you do this gently to avoid stretching or tearing the material.

How do I remove the vinyl when I want a change?

Gently heat the vinyl with a hairdryer on a low setting. This softens the adhesive, making it easier to peel off cleanly without damaging the underlying surface.

Is this vinyl suitable for areas that get very hot?

The vinyl is heat resistant up to 70°C. It is not suitable for direct contact with hot pans. Always use worktop savers or trivets for hot items.

Do I need special tools for application?

While not strictly essential, a felt edge smoother is highly recommended for smoothing out air bubbles and a sharp utility cutter for trimming excess material. A hairdryer can also be helpful.

Can I use this on textured surfaces?

The vinyl adheres best to smooth, non-porous surfaces. Textured surfaces may result in a less durable bond and visible texture through the film.

How should I clean the vinyl surface?

You can wipe the surface clean with a damp cloth. Avoid using abrasive cleaners that could scratch or damage the finish. Wipe up spills promptly to prevent staining.

Is this product suitable for outdoor use?

The product information does not specify suitability for outdoor use. It is designed for interior surfaces like kitchen worktops and furniture.

Troubleshooting

Air bubbles or creases during application

Gently lift the affected area of the film and reapply, using a felt edge smoother to press out air. For stubborn bubbles, a small pinprick may release trapped air.

Film not sticking well

Ensure the surface is clean, dry, and free from dust or grease. Re-apply heat gently with a hairdryer to activate the adhesive.

Difficulty applying around corners or edges

Use a hairdryer on a low setting to warm and soften the vinyl, making it more pliable. Stretch and smooth gently into place.

Water damage or lifting at edges near sink/hob

Ensure a proper silicone sealant has been applied around these areas. If not, remove the vinyl from the edge, dry thoroughly, and reapply sealant before re-adhering the vinyl.

Pros and Cons

Pros

  • Affordable alternative to replacing surfaces.
  • Easy to apply yourself, saving on labor costs.
  • Removable, ideal for temporary decor or rental properties.
  • Offers a realistic and updated look with various designs.
  • Simple to clean and maintain.
  • Repositionable during application to correct mistakes.

Cons

  • Limited heat resistance (70°C), requiring caution with hot items.
  • Requires careful sealing around sinks and hobs to prevent water damage.
  • May require a hairdryer for application on curved edges and for removal.
  • Not a factory-sealed retail roll, but repackaged for custom lengths.
  • Surface may be susceptible to staining if spills are not wiped promptly.

Setup, Compatibility & Care

Setup:

  1. Ensure the surface is clean, dry, and smooth. Remove any old adhesive or debris.
  2. Measure and cut the vinyl film to the desired size, using the grid on the reverse for accuracy. Allow for a small overlap if needed.
  3. Peel back a small portion of the backing paper from one edge.
  4. Carefully align the film with the edge of the surface and begin to press it down.
  5. Gradually peel the backing paper while simultaneously smoothing the film onto the surface using a felt edge smoother or a similar tool. Work from the center outwards to push out air bubbles.
  6. For curved edges, gently warm the film with a hairdryer on a low setting to make it more pliable before applying pressure.
  7. Trim any excess film with a sharp utility knife or cutter.
  8. If applying near sinks or hobs, seal the edges with a suitable silicone sealant to prevent water from seeping underneath.

Compatibility:

  • Suitable for flat, smooth, and non-porous surfaces.
  • Ideal for countertops, tabletops, furniture, doors, and other cabinetry.
  • Not recommended for direct contact with hot pans (use worktop savers).

Care:

  • Wipe clean with a damp cloth. Avoid abrasive cleaners.
  • Wipe up spills immediately to prevent potential staining.
  • Heat resistance is up to 70°C. Do not place hot pans directly on the surface.

Price History

DatePrice
Visit shop