Shopping.co.uk

Autotek Spray Paint - Arctic White - 300mL

Autotek Spray Paint - Arctic White - 300mL

Exact match for Manufacturer Paint Code: 326 Autotek Nissan Arctic White 326 is compatible with va...

Best current price£12.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£12.99Visit shop

Autotek Nissan Arctic White Fast Drying High Coverage Aerosol Spray Paint 300mL

Visit shop

All Offers

4 offers from £12.99 - £13.99

View price history by clicking the chart icon.

eBayAutotek Nissan Arctic White Fast Drying High Coverage Aerosol Spray Paint 300mL
Free delivery in 1–3 days
£12.99
Visit shop
My Motor WorldAutotek White Nissan Arctic Spray Paint 300Ml
Free delivery in 1–3 days
£12.99
Visit shop

Product Information

Full details

This Autotek Spray Paint in Arctic White (326) is designed for automotive enthusiasts and DIYers seeking an exact colour match for Nissan vehicles. Its key benefit is providing a durable, professional-quality finish that closely replicates the original factory paint. A potential caveat is the need for proper preparation and application in a well-ventilated area to achieve optimal results.

All features

ColourWhite
Model Part Number326
BrandAutotek
Container Volume300mL

Extended Product Information

FAQs

What is the exact paint code this product matches?

This Autotek spray paint is an exact match for Nissan's Arctic White with the paint code 326.

On what surfaces can I use this spray paint?

The paint is formulated for use on metal, glass fibre, and rigid plastic surfaces commonly found on vehicles.

How long does it take for the paint to dry?

The paint is touch dry in approximately 10-20 minutes, but requires 24 hours for full curing.

Do I need to use a primer?

While not strictly mandatory for all applications, using a minimum of two coats of Autotek White Primer is recommended for optimum adhesion and the best possible finish.

Can I use this paint in cold weather?

It is recommended to apply the paint at temperatures between 15°C and 25°C for best results. Avoid application in cold conditions.

Is this paint suitable for clear coat finishes?

Yes, this Autotek spray paint is compatible with nearly all automotive paint finishes, including clear coat and cellulose finishes.

How should I clean the nozzle after use?

After each application, turn the aerosol upside down and spray for 2-5 seconds to clear any paint from the nozzle and prevent blockages.

Troubleshooting

Uneven spray or sputtering

Shake the can vigorously for 2 minutes. Ensure the nozzle is not blocked by spraying upside down for a few seconds. Clean the nozzle if necessary.

Poor adhesion or peeling

The surface may not have been adequately cleaned or prepared. Ensure the surface is free from grease, wax, and dirt. Reapply primer if necessary and ensure the surface is dry.

Colour doesn't match

Ensure you are using the correct paint code (326 for Arctic White). Verify that the original paint on the vehicle has not faded significantly, as exact matches are for the original factory finish.

Runs or drips in the paint

You may be applying the paint too thickly or too closely. Apply in multiple thin coats from the recommended distance, allowing adequate drying time between coats.

Pros and Cons

Pros

  • Provides an exact colour match for Nissan Arctic White (326).
  • Durable, weather-resistant finish for long-lasting protection.
  • Fast-drying formula saves time during application.
  • Suitable for a variety of automotive surfaces.
  • Achieves a professional, smooth finish with minimal effort.

Cons

  • Requires thorough surface preparation for best adhesion.
  • Best applied in a well-ventilated outdoor area.
  • Application requires specific temperature range (15°C-25°C).
  • May not be suitable for all paint types without testing.

Setup, Compatibility & Care

Preparation is key for optimal results. Ensure the surface is clean, dry, and free from dirt, rust, or wax. Mask off any adjacent areas to prevent overspray. For best adhesion and finish, applying a minimum of two coats of Autotek White Primer is recommended.

Application requires careful attention. Shake the aerosol can vigorously for at least 2 minutes before use. Hold the can 15-25cm away from the surface and apply in thin, even coats. To prevent nozzle blockages, turn the can upside down and spray for 2-5 seconds after each use. Allow 10-20 minutes between coats. The paint should be touch dry within 10-20 minutes, but allow a full 24 hours for complete curing.

Environment and Compatibility: Use this product only outdoors or in a very well-ventilated area. Ideal application temperatures are between 15°C and 25°C. This paint is compatible with most automotive paint finishes, including cellulose, and is suitable for metal, glass fibre, and rigid plastic. Always test on an inconspicuous area first if unsure.

Care: Once fully cured, the finish is durable and weather-resistant. Clean with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals.

Price History

DatePrice
Visit shop