Best current price£12.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.00Visit shop B&Q - Galvanised Turnbuckle Open Body Straining Screw Jaw Jaw (Us Spec Wire Tensioner) 1/2 X 9"
Visit shop2 offers from £12.00
View price history by clicking the chart icon.
This guide is for users needing to tension or adjust wire ropes, chains, or cables, offering a clear view of thread movement for precise adjustments. Its key benefit is the visible thread in its open body design, allowing for easy monitoring of tensioning progress. A caveat is that the open body may be less protected against severe environmental exposure compared to closed-body turnbuckles.
| Colour | Silver |
|---|---|
| Model Part Number | SFGTJJ129 |
| Brand | SecureFix Direct |
An 'Open Body' turnbuckle features a frame that is not fully enclosed. This allows you to see the threaded rod moving in and out as you adjust the tension, providing a visual cue for how much you've tightened or loosened the connection.
The turnbuckle is constructed from hot-dipped galvanised steel, offering good resistance to rust and corrosion.
The visible thread allows for precise monitoring of the extension, helping users achieve and maintain the exact tension required for their application without over-tightening.
This turnbuckle is designed for tensioning and adjusting wire ropes, chains, and cables, not for overhead lifting applications. Always refer to load ratings for specific use cases.
Consider the diameter and type of wire rope, chain, or cable you are using, as well as the total load it will bear. Ensure the turnbuckle's dimensions and load capacity are suitable.
The 1/2" x 9" model has dimensions: A - 0.50", R - 0.63", E - 2.75", G - 1.06", J - 23.50", K - 14.50", M - 25.00", N - 16.00", BB - 9.00".
Ensure the threads are clean and free from debris. Apply a light lubrication to the threads. Check that the tension is not exceeding the turnbuckle's rated capacity.
Verify that the connecting hardware (e.g., pins, bolts, shackles) is properly secured through the jaw eyes. Ensure the jaw eye is not excessively worn.
Clean the affected area with a wire brush. Apply a suitable anti-corrosion compound or lubricant. For severe corrosion, consider replacing the turnbuckle.
Setup: To use the turnbuckle, ensure the jaw ends are compatible with your attachment points (e.g., eye bolts, U-bolts, or loops). Thread one jaw onto the existing termination of your wire rope, chain, or cable. Attach the other jaw to the corresponding anchor point. Rotate the body of the turnbuckle to achieve the desired tension. The visible thread allows you to track the amount of extension and thus the applied tension.
Compatibility: This turnbuckle is designed for use with wire rope, chain, and cable. Ensure that the diameter of your wire rope or chain is appropriate for the jaw opening and the overall load capacity of the turnbuckle.
Care: To maintain optimal performance and longevity, regularly clean the turnbuckle to remove dirt and debris, especially from the threaded sections. Periodically inspect the threads for wear or damage. For prolonged outdoor use, a light lubrication of the threads can help prevent seizing and ensure smooth operation. Check for signs of corrosion and address them promptly.
