Best current price£7.34from B&Q
Shopping.co.uk recommended and popular offers
B&Q£7.34Visit shop B&Q - Tct Straight Cut Router Bit 12.7mm D 25mm Depth Cutter Cutting Tool 1/2 Shank
Visit shop2 offers from £7.34
View price history by clicking the chart icon.
The AB Tools TCT Straight Cut Router Bit (TE535_G) is an essential tool for professional woodworkers and DIY enthusiasts looking for reliable precision in their routing tasks. It excels at delivering clean, splinter-free cuts across a variety of materials including hardwood, softwood, MDF, and chip wood. While it offers impressive durability thanks to its tungsten carbide tips, users must ensure their router is compatible with a 1/2-inch shank before purchasing, as it is not suitable for smaller 1/4-inch collets.
| Model Part Number | TE535_G |
|---|---|
| Brand | AB Tools |
No, this bit requires a router with a 1/2-inch collet.
It is suitable for hardwood, softwood, MDF, and chip wood.
While the blade length is 25mm, it is recommended to take shallower passes if you are removing a large amount of material to preserve the bit's life.
Yes, it is designed for both commercial and occasional professional use.
Use a specialized router bit resin cleaner or a mild solvent to wipe away sap and wood debris.
Yes, it is effective for straight edge trimming applications.
Reduce the feed rate or take shallower cuts; also check if the bit has accumulated resin and requires cleaning.
Ensure the bit is tightened correctly in the collet and that the shank is not damaged or dirty.
Check if the router speed is set appropriately for the bit diameter and ensure the wood grain direction is being considered.
Setup: Ensure the bit is inserted into your router's 1/2-inch collet with at least 3/4 of the shank length inside the collet to ensure safety and balance. Always tighten the collet nut securely using the correct wrenches provided by your router manufacturer.
Compatibility: This bit is exclusively compatible with routers that accept a 1/2-inch shank. Do not attempt to use adapters to fit this into smaller collets as this can cause vibration and safety hazards.
Care: Clean the bit after use with a resin remover to prevent build-up from wood sap, which can increase friction and heat. Store in a protective case to prevent chipping the carbide edges. If the bit becomes dull, have it professionally sharpened to preserve the original geometry.
