Bartoline PVA Adhesive & Sealer - White
Best current price£16.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£16.99Visit shop B&Q - 3X Pva Adhesive & Sealer Multi-Purpose Glue Bond Agent Drying 500Ml
Visit shopB&Q£16.99Visit shop All Offers
3 offers from £16.99
View price history by clicking the chart icon.
B&QB&Q - 3X Pva Adhesive & Sealer Multi-Purpose Glue Bond Agent Drying 500Ml
Free delivery in 1–3 days
£16.99
Visit shop
eBay3x Bartoline PVA Adhesive & Sealer Multi-Purpose Glue Bond Agent Drying 500mL
Free delivery in 1–3 days
£16.99
Visit shop
3x Bartoline PVA Adhesive & Sealer Multi-Purpose Glue Bond Agent Drying 500mLFree delivery in 1–3 days£16.99Visit shop →
Product Information
Full details
The Bartoline PVA Adhesive & Sealer is a versatile white, water-based bonding agent, adhesive, and sealer designed for a wide range of DIY and building tasks. It excels as a multi-purpose adhesive, a primer for porous surfaces, a dust sealer, and an admixture for cementitious materials. While it offers excellent adhesion to most building substrates, it is not suitable for use on PVC or rubber, nor in exterior applications or areas prone to constant damp.
All features
| Colour | White |
|---|---|
| Model Part Number | BA5180 |
| Brand | Bartoline |
Extended Product Information
FAQs
What surfaces can Bartoline PVA be used on?
It bonds to most common building and DIY materials such as wood, cork, textiles, plaster, plasterboard, and concrete. It is not suitable for PVC or rubber.
Can this product be used outdoors?
No, Bartoline PVA is for interior use only and must not be used in exterior applications or in areas subject to constant damp.
How do I use it as a primer before painting?
Dilute 1 part PVA with 4 parts water and apply evenly with a brush to seal porous surfaces like plaster or plasterboard.
What is the drying time?
The bond forms relatively quickly, but it takes approximately 24 hours for the adhesive to reach maximum strength.
Can I add Bartoline PVA to cement or mortar?
Yes, it can be used as an admixture to improve adhesion and tensile strength. For small cement renders, mix PVA with an equal amount of water and add to the mortar. For larger areas, dilute 3 parts PVA with 1 part water and brush onto the surface before applying the render.
How should I clean up spills or tools?
Clean up spills and tools immediately after use with warm water.
Is it suitable for use in bathrooms or kitchens?
It should not be used in areas subject to constant damp. Ensure good ventilation if used in areas with occasional moisture, but it is not recommended for constant exposure.
Troubleshooting
Adhesive bond is weak
Ensure surfaces were clean, dry, and free from grease. Verify that joints were clamped securely for the full 24 hours recommended for maximum strength. Reapply if necessary, ensuring proper surface preparation.
Primer is not sealing the surface effectively
Check if the dilution ratio (1 part PVA to 4 parts water) was followed correctly. Ensure the PVA was applied evenly and allowed to penetrate. For very porous surfaces, a second coat may be needed.
Product remains tacky long after application
This can occur in humid conditions or if applied too thickly. Ensure adequate ventilation. While it may remain tacky for longer, it will continue to cure. Avoid further treatments until it has sufficiently dried.
Difficulty cleaning tools
Clean tools immediately after use with warm water. If the PVA has dried on tools, it may require soaking or mechanical removal.
Pros and Cons
Pros
- Highly versatile for multiple DIY tasks.
- Effective bonding to a wide range of common building materials.
- Improves the performance of cement and plaster mixes.
- Acts as an excellent primer for porous surfaces.
- Water-based and easy to clean.
Cons
- Not suitable for use on PVC or rubber.
- Cannot be used in exterior applications.
- Not recommended for areas subject to constant damp.
- Requires clamping for optimal adhesive strength.
- Needs specific dilution ratios for different applications.
Setup, Compatibility & Care
Preparation: Ensure all surfaces are clean, dry, sound, and free from grease before application.
Compatibility: Bonds to most common building and DIY materials including wood, cork, textiles, plaster, plasterboard, and concrete. Do not use on PVC or rubber.
Usage:
- Adhesive: Apply to both surfaces, join, and clamp for 24 hours.
- Primer/Sealer: Dilute 1 part PVA with 4 parts water and apply by brush to porous surfaces.
- Bonding Agent: Apply neat to surfaces before plastering or rendering, while tacky.
- Cement Admixture: For small areas, mix PVA 1:1 with water and add to mortar. For larger areas, dilute 3 parts PVA with 1 part water and brush onto the surface before applying render.
Care: Clean tools and spills immediately with water. Store in a cool, dry place away from frost. Ensure the container is tightly sealed after use.
Limitations: This product is for interior use only and should not be used in areas exposed to constant damp or moisture.