Integral LED Filament Frosted Candle Light Bulbs - 1.8W - 2700K - SES E14

These 1.8W Integral LED Filament Frosted Candle Light Bulbs are an energy-efficient replacement fo...

Best current price£7.22from eBay

One Offer

1 offer from £7.22

View price history by clicking the chart icon.

eBayLight Bulb Frosted 1.8w LED Pearl Candle Full Glass Non Dimmable 2700K E14 250lm
Free delivery in 1–3 days
£7.22
Visit shop

Product Information

Full details

The Integral LED Filament Frosted Candle Light Bulb is an ideal lighting solution for homeowners and businesses seeking a high-efficiency alternative to traditional 25W incandescent candle bulbs. By consuming only 1.8W of energy, these bulbs provide a soft, 2700K warm white glow suitable for decorative fixtures, chandeliers, and wall sconces, though users should note that they are strictly non-dimmable and unsuitable for circuits equipped with dimmer switches.

All features

Model Part NumberILCANDE14NC060
BrandIntegral

Extended Product Information

FAQs

Are these bulbs dimmable?

No, these specific bulbs are non-dimmable and should not be used with dimmer switches.

What is the color temperature of these bulbs?

They emit a warm white light at 2700K.

What kind of base do these bulbs use?

They use a standard E14 Small Edison Screw (SES) base.

How long will these bulbs last?

These bulbs have a rated lifespan of over 15,000 hours.

Can I use these outdoors?

These bulbs are designed for indoor use; they should only be used outdoors if installed in a fully enclosed, weatherproof light fixture.

What is the equivalent incandescent wattage?

These 1.8W LED bulbs are a direct energy-efficient replacement for 25W incandescent lamps.

Troubleshooting

Bulb flickers continuously

Ensure the bulb is not on a dimmer circuit and verify that it is screwed firmly into the E14 socket.

Bulb does not light up

Check the light fixture's power source and ensure the fuse or circuit breaker is operational; if still failing, test the bulb in a known working socket.

Pros and Cons

Pros

  • Extremely low energy consumption (1.8W)
  • Significant cost savings over 15,000 hours
  • Instant full brightness
  • Warm, inviting color temperature
  • Frosted finish reduces glare

Cons

  • Not compatible with dimmer switches
  • Limited light output (250 lumens)
  • Cannot be used in enclosed fixtures where heat dissipation is restricted

Setup, Compatibility & Care

Installing these bulbs is straightforward due to their standard E14 Small Edison Screw (SES) base. Before installation, ensure the power to the fixture is switched off to avoid any electrical hazards.

  • Compatibility: Ensure your fixture uses an E14 socket. These bulbs are intended for 240V mains voltage.
  • Dimming Warning: Do not install these bulbs in circuits controlled by wall-mounted dimmers, as this will cause flickering or failure of the internal electronics.
  • Care: Use a dry, lint-free cloth to dust the bulbs occasionally while the power is off and the glass has cooled. Avoid using harsh chemical cleaners, as they can damage the frosted finish.

Price History

DatePrice
Visit shop