Bond It Silicone Sealant Remover - Non Drip - 125Ml
The BOND IT Silicone SEALANT Remover in a non-drip 125ml formulation is designed to effectively di...The BOND IT Silicone SEALANT Remover in a non-drip 125ml formulation is designed to effectively dissolve and remove old silicone sealant. It simplifies the process of preparing surfaces for resealing. Struggling with stubborn silicone sealant? Introducing Bond It Silicone Sealant Remover Non-Drip Eater, a fast-acting gel that removes cured silicone sealant with ease. This 125ml tube tackles unwanted sealant on sinks, countertops, glass, and more, leaving surfaces clean and ready for re-sealing. Its non-drip formula allows for mess-free application, making it perfect for renovations and repairs. A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or counter tops. Can be used to remove old silicone sealant during renovations. It is suitable for use on brick, concrete, metals, glass, PVCu, melamine laminates and acrylic. Ensure the surface of the material is completely dry. Cut away excess sealant with a knife or sharp blade. Protect any surrounding paint work with masking tape. Brush the remover over the old silicone, being careful to avoid areas of correctly applied sealant.
BOND IT Silicone Sealant Remover Non Drip Eater 125ml x 6Free delivery in 1–3 days£23.30Visit shop →
Product Information
Full details
This guide is for anyone needing to remove old silicone sealant quickly and effectively. The Bond It Silicone Sealant Remover provides a fast-acting, non-drip solution for removing cured silicone from various surfaces, making it ideal for renovations and repairs. However, it's crucial to follow the application instructions carefully to avoid damaging surrounding surfaces.
All features
Model Part Number
DBON1125
Brand
Bond it
Extended Product Information
FAQs
How long should I leave the remover on?
Follow the instructions on the product label. Typically, a few minutes is sufficient, but this may vary depending on the sealant and conditions.
What tools do I need?
A knife or sharp blade, a scraper or plastic tool, a brush or applicator, masking tape, and a clean cloth.
Can I use this on painted surfaces?
It is recommended to protect painted surfaces with masking tape to avoid damage. Test in a small, inconspicuous area first.
What should I do if the remover gets on my skin?
Wash the affected area immediately with soap and water. If irritation persists, seek medical advice.
Can I reuse the tube?
The tube is designed for single use. Dispose of the empty container properly.
Is this product flammable?
Refer to the product label for safety information. Keep away from heat and open flames.
How do I dispose of the removed sealant?
Dispose of the removed silicone sealant according to local regulations. Generally, it can be disposed of as household waste once it has completely dried.
Troubleshooting
Remover not working effectively.
Ensure the surface is dry and free from dust. Apply a generous layer and allow more time for the remover to act on the sealant. Multiple applications may be necessary.
Remover is dripping.
Ensure you are using the product on a flat surface. If the problem persists, try a different applicator.
Pros and Cons
Pros
Non-drip formula for controlled application.
Effective on various surfaces.
Fast-acting, saving time and effort.
Easy to use, simplifying the removal process.
Suitable for both DIY and professional use.
Cons
Requires careful application to avoid damaging surrounding surfaces.
May require multiple applications for heavily applied sealant.
Effectiveness depends on the type and age of the sealant.
Not suitable for all types of materials; test in an inconspicuous area first.
Setup, Compatibility & Care
Preparation:
Ensure the surface is completely dry.
Cut away excess sealant with a knife or sharp blade.
Protect surrounding areas with masking tape.
Application:
Brush the remover over the old silicone, avoiding areas with correctly applied sealant.
Allow the remover to act on the silicone according to the product instructions (usually a few minutes).
Removal:
Use a scraper or plastic tool to remove the softened silicone.
Wipe the surface clean with a cloth.
Compatibility:
Suitable for use on brick, concrete, metals, glass, PVCu, melamine laminates, and acrylic.
Always test in an inconspicuous area first to ensure compatibility.