Marlborough Pack Of 10 Planed Redwood Pse Timber - 25mm (T) X 50mm (W) X 4200mm (L)

This is Planed Square Edge (PSE) Redwood Timber, a premium joinery-grade softwood.

Each piece measures 25mm in thickness and 50mm in width. The length of each of the 10 pieces is 4200mm.

This timber is graded for interior joinery applications. It is not treated for outdoor use and may not withstand weather exposure.

This is a pack of 10 individual pieces of timber.

The timber is pre-planed for a smooth finish. Light sanding with fine-grit sandpaper (220 grit or higher) is recommended before applying paint, stain, or varnish for optimal adhesion and a flawless result.

Yes, this timber can be easily cut to custom lengths using standard woodworking saws.

You can apply a variety of finishes including paint, wood stain, varnish, or oil. Ensure the surface is properly prepared and the chosen finish is suitable for softwood.

Allow the timber to acclimatize in a flat, dry environment for at least 48-72 hours. If warping persists and is significant, contact the supplier.

Ensure your cutting tools (saws, planes) are sharp. Sand with progressively finer grits of sandpaper, starting with around 120 grit and finishing with 220 grit or higher for a smooth surface.

Double-check measurements and cutting angles. Ensure the timber edges are clean and free from debris. Use appropriate clamps and wood glue for strong, accurate joints.

Ensure the timber surface is clean, dry, and free from dust or residues. Lightly sand the surface with fine-grit sandpaper (220 grit) before applying primer or finish.