Best current price£4.98from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£4.98Visit shop Floplast Flofit+ Push Fit Reducing Tee - 22Mm X 15Mm X 22Mm
Visit shop1 offer from £4.98
View price history by clicking the chart icon.
This FloPlast push-fit reducing tee is designed for plumbers and DIY enthusiasts needing to connect three pipes of different diameters (22mm, 15mm, 22mm) in a T-junction for fluid distribution or combination. Its key benefit is the ease of installation, removal, and reusability, making it a versatile alternative to traditional copper fittings. A potential caveat is ensuring correct pipe insertion and locking for a secure seal. This fitting is suitable for drinking water, central heating, and both hard and soft water areas.
| Model Part Number | FRT221522 |
|---|---|
| Brand | FloPlast |
This is a reducing tee designed to connect two 22mm pipes and one 15mm pipe in a T-shape configuration.
No, typically only a pipe cutter to ensure a clean pipe end is needed. The push-fit mechanism does not require wrenches or soldering equipment.
Yes, this fitting is suitable for use with central heating systems and hot drinking water.
To disconnect, twist the plastic nut counter-clockwise and push it towards the fitting body to release the pipe. You may need to use a specific disconnection tool for a cleaner release.
Yes, for all push-fit systems, a pipe insert is crucial to support the pipe wall and ensure a secure, leak-free connection.
This FloPlast Flofit+ reducing tee comes with a 50 Year Manufacturer's Guarantee.
While designed for plumbing systems, its plastic construction offers resistance to water. However, prolonged exposure to UV light or extreme temperatures might affect its longevity. It's best suited for internal plumbing applications.
Ensure the pipe was pushed in fully and squarely, and the locking nut was tightened correctly. Check that the pipe is not damaged and that a pipe insert was used. Try disconnecting and re-seating the pipe.
Verify the pipe end is clean, cut square, and free from burrs. Ensure no debris is inside the fitting. Confirm you are using the correct size pipe for the fitting.
Check that the pipe insert is correctly seated within the pipe. Ensure the pipe is pushed in fully to engage the locking mechanism. If the fitting is old or damaged, replace it.
Setup:
Compatibility:
Care:
