Best current price£1,000.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£1,000.00Visit shop B&Q - 0.5 Ton Electric Chain Hoist 415V 3M (Three Phase Lifting Hoist 500Kg Pulley)
Visit shop2 offers from £1,000.00
View price history by clicking the chart icon.
This 0.5 Ton Electric Chain Block by SecureFix Direct is designed for professionals needing to simplify lifting heavy loads indoors or outdoors. Its key benefit is providing powered lifting assistance, significantly easier than manual blocks, with IP54 protection against dust and water splashes. A key caveat is that installation *must* be performed by a competent and qualified technician. Features include a 0.5-ton Safe Working Load (SWL), 3-meter lift height, 415V three-phase power, and a 0.8KW motor for efficient operation.
| Brand | SecureFix Direct |
|---|
The Safe Working Load (SWL) for this Electric Chain Block is 0.5 Ton, which is equivalent to 500 Kilograms.
Yes, it has an IP54 protection rating, making it suitable for both indoor and outdoor use against dust and splashing water.
This chain block requires a 415 Volt, three-phase power supply.
The maximum height of lift for this model is 3 meters.
Installation must only be performed by a competent and qualified technician to ensure safety and proper operation.
Yes, the unit is supplied with a test certificate.
The lifting speed is 6.3 meters per minute.
Verify that the 415V three-phase power supply is correctly connected and active. Check the main power switch and any circuit breakers. Ensure the emergency stop button (if applicable) is disengaged.
Inspect the chain for kinks, twists, or damage. Check for any obstructions in the lifting path. Ensure the load is within the 0.5 Ton SWL limit. Overloading can cause operational issues.
Stop operation immediately and inspect the unit. Check for loose components or potential internal issues. Consult a qualified technician if the noise persists.
Reduce the frequency or duration of continuous operation. Ensure the unit is not overloaded. Check for adequate ventilation around the motor. If overheating persists, a technician should inspect the motor.
Setup: Installation of this Electric Chain Block *must* be carried out by a competent and qualified technician. This includes secure mounting, proper electrical connections to a 415V three-phase power source, and load testing. Ensure the mounting structure can support the SWL of 0.5 Ton (500KG).
Compatibility: This unit requires a 415V three-phase power supply. Ensure your electrical system meets these requirements. It is designed for use with appropriate lifting accessories (hooks, slings, etc.) rated for the load.
Care: Regularly inspect the chain, hook, and electrical cable for any signs of wear or damage. Keep the unit clean and free from excessive dust or debris. After use in dusty or wet conditions, wipe down the exterior. Refer to the manufacturer's manual for detailed maintenance schedules and procedures. A qualified technician should perform periodic inspections.
