Best current price£232.00from TVA Technology
Shopping.co.uk recommended and popular offers
TVA Technology£232.00Visit shop Audio Technica Atlpw30tk Fully Manual Belt Drive Hi Fi Turntable In Wood
Visit shop
eBay£239.00Visit shop Audio-Technica Turntable LPW30TK Teak with Built-in Phono Pre-Amp
Visit shop5 offers from £232.00 - £299.99
View price history by clicking the chart icon.
1 offer from £120.00
View price history by clicking the chart icon.
The Audio-Technica AT-LPW30TK is a manual, belt-drive turntable designed for vinyl enthusiasts seeking high-fidelity audio and a minimalist design. It provides a pure, distortion-free listening experience with its two-speed operation and anti-resonance construction. Note that this is a fully manual turntable, so you'll need to cue the tonearm yourself.
| Colour | Brown |
|---|---|
| Model Part Number | LPW30TK |
| Brand | Audio-Technica |
Use a soft, anti-static cloth to wipe down the plinth and dust cover. Avoid harsh chemicals.
The stylus should be replaced after about 300-500 hours of use, or sooner if you notice a decline in sound quality.
Yes, you can upgrade the cartridge. The AT-LPW30TK uses a standard headshell, allowing you to easily swap cartridges. Ensure the new cartridge is compatible with the tonearm.
You can use either powered speakers (with a built-in amplifier) or passive speakers, which require an external amplifier.
The anti-skate control is located on the tonearm base. Adjust it to match the tracking force setting. Consult the manual for detailed instructions.
Belt-drive turntables, like the AT-LPW30TK, use a belt to isolate the motor from the platter, reducing vibration. Direct-drive turntables have the motor directly connected to the platter.
No, it does not come with a dust cover.
Check all connections (RCA cables and power) to ensure they are secure and correctly connected. Make sure the amplifier or powered speakers are turned on and the correct input is selected. Verify that the phono preamp switch (if applicable) is set correctly.
Ensure the turntable is properly grounded. Check the RCA cable connections for any loose connections or interference. Try moving the turntable away from other electronic devices that might cause interference.
Check the stylus for dust or debris and clean it gently. Verify that the tracking force and anti-skate settings are properly adjusted. Make sure your speakers are not overloaded.
Make sure the speed selector is set to the correct speed (33 1/3 or 45 RPM) for your record.
