3D Chrome Emblem 2 Horses - Pilot 15027
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Pilot 3D Chrome Emblem 2 Horses (15027) is an ideal accessory for car and truck owners looking to add a personalized, sophisticated touch to their vehicle's exterior. This high-quality emblem offers a striking dimensional aesthetic and a durable finish, though users should ensure the application surface is meticulously prepared to ensure the adhesive bond holds up against harsh weather conditions.
All features
| Model Part Number | 15027 |
|---|---|
| Brand | Pilot |
Extended Product Information
FAQs
Can this emblem be applied to curved surfaces?
It is best applied to flat or very slightly curved surfaces. Excessive curvature may prevent the rigid emblem from bonding correctly.
Is the emblem safe for car washes?
Yes, once properly cured, the waterproof adhesive is designed to withstand standard automated car washes.
Can I remove the emblem if I change my mind?
Yes, you can typically remove it by using a heat gun or hair dryer to soften the adhesive, followed by a mild adhesive remover to clean any residue.
Does the emblem come in other finishes?
This specific Pilot 15027 model is designed with a specific chrome-plated finish.
What is the exact size of the emblem?
The emblem measures 105 mm in width and 72 mm in height.
Troubleshooting
Emblem lifting at the edges
Ensure the surface was cleaned with alcohol before application. If it continues to lift, use an automotive-grade double-sided tape for reinforcement.
Adhesive not sticking to surface
The surface might be too cold. Use a hair dryer to gently warm the metal of the vehicle and the adhesive on the emblem before pressing it into place.
Pros and Cons
Pros
- Durable chrome-plated finish resists environmental wear
- Easy peel-and-stick installation
- Provides a premium dimensional look
- Waterproof adhesive ensures a secure hold
Cons
- Requires very precise placement during initial application
- Surface must be perfectly clean for long-term adhesion
- Not suitable for porous or heavily textured surfaces
Setup, Compatibility & Care
To install the emblem, ensure the target surface is thoroughly cleaned with isopropyl alcohol to remove wax, grease, or dirt. Once dry, peel the backing from the adhesive and press firmly into the desired position, applying consistent pressure for 30 seconds. Avoid exposing the emblem to moisture or extreme agitation for the first 24 hours to allow the adhesive to fully cure. For maintenance, treat the emblem like the rest of your vehicle's chrome trim—simply wash with mild soap and water, and avoid abrasive scrubbers that could scratch the chrome finish.