Plasterboard Cavity Wall Fixings Hollow Wall Anchors Heavy Duty - GeeFix - Red
GeeFix Plasterboard Cavity Wall Fixings Hollow Wall Anchors Heavy Duty (Pack of 8 Fixings). Each f...GeeFix Plasterboard Cavity Wall Fixings Hollow Wall Anchors Heavy Duty (Pack of 8 Fixings). Each fixing can support a load of 270Kg. Curved backplate enables easy insertion into cavities as shallow as 30mm. Ideal for installing heavy items such as flat screen TVs, radiators, cupboards, shelving etc. Extra fixing points can be drilled into the backplate when securing smaller items where fixing points are often close together. Ideal for re-fixing an installation back in the same place where other types of fixing have failed. Weight: 0.46 Pounds, Manufacturer: GeeFix Ltd
The GeeFix Plasterboard Cavity Wall Fixings are designed for DIY enthusiasts and professionals needing to securely mount heavy items on hollow plasterboard walls. Their key benefit is the exceptional load-bearing capacity of 270Kg per fixing, allowing for the installation of items like flat-screen TVs and radiators. A potential caveat is the need for a cavity depth of at least 30mm for effective insertion.
All features
Colour
Red
Model Part Number
43237-2
Brand
GeeFix
Extended Product Information
FAQs
What is the maximum weight each GeeFix can hold?
Each GeeFix plasterboard cavity wall fixing can support a load of up to 270Kg.
What is the minimum cavity depth required for these fixings?
The minimum cavity depth required is 30mm due to the curved backplate design.
Can these fixings be used in solid walls?
No, these fixings are specifically designed for hollow plasterboard walls and cavities.
How many fixings are included in a pack?
A standard pack contains 8 GeeFix fixings.
Can I use these fixings to mount a radiator?
Yes, the high load capacity makes them ideal for installing heavy items such as radiators.
What is the benefit of the extra fixing points on the backplate?
The extra fixing points allow for more precise installation of smaller items where standard fixing points might not align correctly.
What color are the GeeFix fixings?
The GeeFix fixings are red.
Troubleshooting
Fixing does not engage securely in the cavity.
Ensure the cavity depth is sufficient (minimum 30mm) and the drilled hole is the correct size for the fixing. Verify the backplate is not obstructed.
Screw will not tighten into the fixing.
Check that the correct size screw is being used. Ensure the screw is aligned with the fixing's pre-drilled hole and not at an angle. The fixing must be fully seated against the wall surface.
The item being mounted feels unstable.
Confirm that the maximum load capacity of 270Kg per fixing is not exceeded. Use multiple fixings for heavier items and ensure all fixings are properly seated and secured.
Pros and Cons
Pros
Exceptional weight support for heavy items.
Easy installation even in shallow wall cavities.
Versatile enough for a wide range of fixtures.
Provides extra fixing points for precise mounting.
A robust solution for repairing previous failed fixings.
Cons
Requires a minimum cavity depth of 30mm.
Pack of 8 may be insufficient for very large projects.
Color may not blend with all wall finishes (Red).
Setup, Compatibility & Care
Setup:
Ensure the wall cavity depth is at least 30mm.
Drill an appropriate sized hole for the fixing.
Insert the GeeFix fixing into the hole, allowing the curved backplate to engage with the cavity.
Secure the fixture using screws through the designated holes on the fixing's backplate.
Compatibility:
Primarily designed for plasterboard and hollow wall cavities.
Suitable for use with a wide range of screws compatible with the fixture being mounted.
Compatible with wall studs for added support when needed.
Care:
These are a permanent or semi-permanent fixing solution.
Avoid over-tightening screws, which could damage the plasterboard.
No specific cleaning or maintenance is required for the fixings themselves.