Scolmore Click Mode 13A Fused Spur Switched Neon - White
A classic design with a modern touch, this Mode fused connection unit looks as good in traditional...A classic design with a modern touch, this Mode fused connection unit looks as good in traditional homes as it does in contemporary ones. The smooth and stylish lines combine with a smart polar white finish for a professional installation. This 13A FCU has a single switch and provides an outlet from the mains containing the fuse, perfect for spur circuits and hard-wired appliances. Part of the Click Mode range, it has an antiviral and antibacterial-certified plate for a fit that's sanitary as well as stylish. It features double pole switching for a safer installation and twin earth fitted as standard for high-integrity circuits. All screw terminals are accessible from the top. Minimum back box depth of 25mm required. Plate dimensions are 86mm (W) x 86mm (H) x 9.5mm (D). Terminal capacity is 3 x 2.5mm² or 2 x 4mm². The plates are made using urea formaldehyde which has similar inherent properties to antimicrobial additives that inhibit the growth of infectious diseases. The smooth, modern lines will easily match traditional and contemporary designs alike. The modular design lets designers and installers unprecedented flexibility in creating dedicated wiring solutions to deal specifically with actual wiring needs. This switched fused connection unit with neon is rated at 13A and is IP20 rated. The operational temperature is -5°C to +40°C.
This guide is for homeowners and electricians installing or using the Scolmore Click Mode 13A Fused Spur Switched Neon. It helps you understand the product's features, setup, and maintenance. The key benefit is its safe and convenient power connection for hard-wired appliances. However, note that proper electrical knowledge is required for installation.
All features
Colour
White
Model Part Number
CMA652
Brand
Click Scolmore
Extended Product Information
FAQs
What is the IP rating?
The IP rating is IP20, which means it is protected against solid objects larger than 12.5mm.
What is the terminal capacity?
The terminal capacity is 3 x 2.5mm² or 2 x 4mm².
Where can I install this?
It is suitable for both traditional and contemporary settings.
Is this product suitable for outdoor use?
No, it is not suitable for outdoor use as it is IP20 rated, offering no protection from water ingress.
What is the operational temperature range?
The operational temperature is -5°C to +40°C.
What type of fuse does it use?
It uses a standard 13A fuse. Always replace with the correct type.
What is the double pole switching?
Double pole switching disconnects both the live and neutral wires, ensuring safer isolation of the connected appliance.
How do I clean the unit?
Use a soft, dry cloth to clean the surface. Do not use abrasive cleaners or solvents.
Troubleshooting
The neon indicator is not lit.
Check the power supply and the fuse. Ensure the appliance is switched on.
The appliance is not receiving power.
Check the wiring connections and the fuse within the unit. Ensure the appliance is switched on.
Difficulty installing the unit.
Ensure you have the minimum back box depth of 25mm and refer to the wiring diagram.
Pros and Cons
Pros
Safe and reliable power connection.
Antiviral and antibacterial properties enhance hygiene.
Easy to install with accessible terminals.
Suitable for both modern and traditional settings due to its design.
Provides a switched fused connection for hard-wired appliances.
Features double pole switching for enhanced safety.
Cons
Requires a minimum back box depth of 25mm.
Installation should be performed by a qualified electrician.
May not be suitable for all types of appliances.
IP20 rating offers limited protection against moisture.
Setup, Compatibility & Care
Installation: Installation should be performed by a qualified electrician. Ensure the power is turned off at the mains before starting.
Back Box: A minimum back box depth of 25mm is required.
Wiring: Use the correct size of cable, with a terminal capacity of 3 x 2.5mm² or 2 x 4mm².
Compatibility: Compatible with a wide range of electrical systems and appliances within the specified 13A rating.
Care: Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the product is kept dry.