Best current price£14.84from eBay
Shopping.co.uk recommended and popular offers
eBay£14.84Visit shop U-Pol Spot #3 Fast Drying Universal Grey Primer 450ml Aerosol Easy To Sand Upol
Visit shop6 offers from £14.84 - £27.22
View price history by clicking the chart icon.
The U-Pol Spot #3 Fast Drying Universal Primer is designed for automotive technicians and DIY enthusiasts who need a reliable, professional-grade solution for localized surface repairs. Its primary benefit is its exceptional versatility, providing strong adhesion on both metal and plastic surfaces to ensure a smooth, ready-to-paint base. While it is perfect for small rub-through areas, users should note that its fast-drying formula is optimized for spot repairs rather than full-body panel coverage.
| Colour | Grey |
|---|---|
| Model Part Number | SPOT/AL |
| Brand | U-Pol |
| Container Volume | 450ml |
Yes, U-Pol Spot #3 is specifically formulated to adhere to both metal and most plastic automotive parts.
Due to its fast-drying nature, it is typically ready to sand in a short period, though this depends on ambient temperature and humidity.
It is designed to be compatible with most standard automotive paint systems, but it is always best to perform a test patch first.
No, this is a universal primer designed to bond directly to bare metal.
While technically possible, it is intended for spot repairs and localized work; large panels may result in uneven application.
Invert the can and spray briefly to clear the paint from the internal tube, then wipe the nozzle tip with a clean cloth.
The spray was likely applied from too far away; sand lightly with fine-grit sandpaper and ensure you maintain the recommended distance on the next coat.
Ensure the surface was adequately cleaned and degreased; old wax or silicone residue can prevent proper bonding.
Ensure the surface is thoroughly cleaned, degreased, and free of dust or moisture before application. Shake the aerosol can vigorously for at least two minutes to ensure consistent color and formula distribution. Hold the can 15-25cm away from the target area, applying in thin, even coats to prevent runs. Allow proper flash-off time between coats as indicated by the finish dulling. Store the container in a cool, dry place away from direct sunlight. After use, invert the can and spray for a few seconds to clear the nozzle and prevent clogging.
