FloPlast Push Fit Waste Tank Connector - 32mm Black
Tank connectors are most commonly used in commercial applications in situations where a number of ...Tank connectors are most commonly used in commercial applications in situations where a number of tanks need to be linked together. The threaded nut is unscrewed and the fitting is pushed through the hole in the tank so that the flange of the tank connector rests against the tank wall. The nut is then tightened, allowing the washer to make the seal against the tank wall. The outlet is a push fit connection to the pipe. In addition to plumbing installations, tank connectors are commonly used in the fish keeping and pond industries. This fitting is available in 32mm and 40mm size options. This push fit waste system is manufactured in the UK to BS EN 1451 and is British Standard kitemarked. When making a push fit joint, cut the pipe square and remove any burrs, push the pipe into the fitting as far as it will go and then withdraw it by approximately 10mm to allow for any expansion. The joint can be taken apart again if required, but always check that the O ring has not been dislodged from its housing groove in the fitting as this will cause the joint to leak.
Best current price£2.24from Professional Building Supplies
B&Q - Push Fit Waste Tank Connector 32mm BlackFree delivery in 1–3 days£7.33Visit shop →
Product Information
Full details
This guide is for anyone using the FloPlast Push Fit Waste Tank Connector (32mm, Black) in plumbing, fish keeping, or pond applications. It helps you understand how to install and maintain this connector, offering a reliable solution for linking tanks and waste systems. While simple to install, ensure the O-ring is correctly positioned to prevent leaks. This guide covers setup, best practices, and troubleshooting tips.
All features
Model Part Number
FloPlastBlackPushfitWasteTankConnector-32mm
Brand
FloPlast
Extended Product Information
FAQs
What is the primary use of this connector?
This connector is used to link tanks together in plumbing, fish keeping, and pond applications.
What standards does this product meet?
It is manufactured to BS EN 1451 standards and is British Standard kitemarked.
What size options are available?
This connector is available in 32mm.
How do I make a push-fit joint?
Cut the pipe square, remove burrs, push the pipe into the fitting, and then withdraw by approximately 10mm to allow for expansion.
What should I do if the joint leaks?
Check that the O-ring is properly positioned and that the nut is tightened securely. Reassemble if necessary, ensuring the pipe is inserted correctly.
Can I reuse the connector?
Yes, but always check the O-ring after disassembly to ensure it is in good condition and correctly positioned.
Troubleshooting
Connector leaks
Check the O-ring for correct positioning and ensure the nut is tightened securely. Reassemble, making sure the pipe is pushed in fully, and then withdrawn by 10mm.
Difficulty inserting the pipe
Ensure the pipe end is cut squarely and free of burrs. Lubricating the pipe end may help.
Pros and Cons
Pros
Easy installation with push-fit design.
Durable and reliable, made to British standards.
Versatile use in multiple applications.
Provides a secure and leak-proof connection.
Available in 32mm size for common plumbing needs.
Cons
Requires careful alignment to ensure a proper seal.
O-rings must be checked during reassembly.
May require cutting of pipes to ensure a square fit.
Setup, Compatibility & Care
Preparation: Ensure you have the FloPlast Push Fit Waste Tank Connector, a pipe cutter, and the pipe itself.
Cutting the Pipe: Cut the pipe squarely to ensure a proper connection.
Inserting the Connector: Unscrew the threaded nut, and insert the fitting through the hole in the tank.
Securing the Seal: Tighten the nut, ensuring the washer creates a seal against the tank wall.
Push Fit Connection: Push the pipe into the fitting as far as it will go, and then withdraw approximately 10mm.
Compatibility: Compatible with 32mm pipe systems.
Care: Regularly check the connection for leaks. If disassembling, inspect the O-ring for proper placement.