Johnstone's Trade Aqua Guard Gloss Brilliant White - 5L

It is suitable for interior wood and metal surfaces, including iron, steel, planed timber, softwood, timber, and window frames.

Yes, for bare wood, use Johnstone's Trade Aqua Guard Primer Undercoat. For other bare surfaces, use Johnstone's Trade Advanced Multi-Surface Primer. Previously painted surfaces may not require priming if they are sound and clean.

The paint is touch dry in 1-2 hours and can be recoated after 4-6 hours.

This product is specifically designed for interior use. It is not formulated for exterior conditions.

Clean your tools immediately after use with water. Any dried paint may require specialized cleaning solvents.

The coverage is approximately 14 square metres per litre.

As a water-based paint, it generally has a lower odour compared to traditional solvent-based gloss paints, but good ventilation is still recommended during application and drying.

Ensure the surface was properly prepared and primed according to instructions. Incompatible paint may have been applied previously. Ensure the surface was clean and dry before application.

Stir the paint thoroughly. Apply using a good quality brush or roller, maintaining a wet edge. Avoid overworking the paint. Ensure consistent application pressure.

Ensure the correct primer was used, especially on bare wood. Some yellowing can occur over time, particularly in areas with limited light exposure. Ensure adequate ventilation.

Ensure the paint has been stirred thoroughly. If applied in very cold conditions, paint can thicken. Consider applying in a warmer environment. Do not thin unless specified by the manufacturer.