Trek Powerfly FS+ 4 Electric Mountain Bike - Full Suspension - 600Wh

The RIB 2.0 battery can be removed by unlocking it with the provided key (if applicable) and then gently pulling it out from the downtube. Consult your bike's manual for specific instructions.

Range varies greatly depending on terrain, rider weight, assistance level, and battery health. A 600 Wh battery typically offers between 30-80 miles (50-130 km) under optimal conditions. Using the eBike Flow app can help estimate range.

Yes, the Powerfly FS+ 4 is designed to be compatible with Bosch's 800 Wh PowerTube batteries, offering significantly extended range. Ensure the frame can accommodate the larger battery.

Trek typically offers a limited lifetime warranty on frames and a standard warranty on components and the battery. Please refer to the official Trek warranty documentation for precise details.

It is recommended to perform basic suspension maintenance (cleaning stanchions) after every few rides and a more thorough service by a qualified technician annually or every 100-200 hours of use, depending on riding conditions.

While primarily designed for trails, the Powerfly FS+ 4 can be used for commuting, especially if your route includes rougher sections or hills. For smoother commutes, consider adding fenders and lights.

You will need a compatible Bosch eBike charger designed for the specific battery voltage and type. The bike usually comes with one, or it can be purchased separately.

Ensure the battery is correctly inserted and charged. Check that the power button on the battery or display is activated. Verify all electrical connections are secure.

Check battery charge level. Ensure the battery is securely seated. Inspect for any error codes displayed on the Purion 200 remote and consult the Bosch eBike manual or a dealer.

The hydraulic system may need bleeding. Check brake pads for wear. Ensure rotors are clean and free from contaminants. Consult a mechanic if unsure.

The drivetrain may need adjustment. Check cable tension and derailleur alignment. Clean and lubricate the chain and cassette.

Ensure Bluetooth is enabled on your smartphone and the eBike Flow app is updated. Try re-pairing the device through the app's settings. Restart both the bike system and your phone.