Best current price£39.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£39.99Visit shop B&Q - System Tool Kit For And Dpc Cream Installation12mm X 300mm Sds Masonry Drill BitHole Clearing ToolRod Cutter
Visit shop4 offers from £39.99
View price history by clicking the chart icon.
The Dryrod System Tool Kit is designed for trade professionals and serious DIY enthusiasts who need a reliable, precise method for installing damp-proofing rods and creams. By providing the exact masonry bits and cleaning tools required for the job, it ensures a professional-grade moisture barrier; however, users should note that the kit requires a compatible SDS rotary hammer drill to function effectively.
| Brand | Dryrod |
|---|
No, the kit contains only the manual tools and the masonry bit; you must provide your own SDS-compatible rotary hammer drill.
Yes, the included cutting tool allows you to trim the rods to any length required for thinner walls.
Keep the SDS shank clean and lightly oiled, and store the bit in a dry environment to prevent rusting.
Highly recommended; clearing debris from the hole is essential for the damp-proofing rod to seat correctly and perform as intended.
The drill bit requires an SDS chuck. If your drill uses a standard 3-jaw chuck, this bit will not fit.
Withdraw the bit frequently to clear debris and check that the drill is not set to high-torque hammer mode if the masonry is brittle.
Double-check that the adjustable depth marker on the clearing tool is securely tightened before starting the cleaning process.
Ensure the cutting tool blade is clean; if resistance occurs, use a firm, steady pressure rather than a sawing motion.
To begin using the kit, ensure your rotary hammer drill is set to 'rotary only' mode if drilling through fragile brick, or 'hammer' mode for dense masonry. Always verify the depth marker on the clearing tool against your wall thickness before starting to avoid drilling through to the interior. Compatibility is limited to standard masonry wall types; do not attempt to use the drill bit on steel or timber structures. For maintenance, clean the SDS bit shank after use and apply a light coating of machine oil to prevent oxidation. Keep the cutting tool edges free of debris to maintain clean, snag-free cuts on your rods and sealant cartridges.
