Best current price£3.22from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£3.22Visit shop Plumbright White 15 X 15 X 10Mm Reducing Tee Plastic Spt67661m
Visit shop1 offer from £3.22
View price history by clicking the chart icon.
The Plumbright 15x15x10mm Reducing Tee is designed for professional plumbers and DIY enthusiasts who need to branch off a 15mm mainline to a 10mm pipe without the use of specialized tools. Its key benefit is the rapid push-fit mechanism which significantly reduces installation time compared to traditional copper or soldered joints. A notable caveat for users is that it requires perfectly square-cut pipe ends and full insertion to ensure a secure, leak-free connection, as improper preparation can compromise the internal seals.
| Model Part Number | SPT67661M |
|---|---|
| Brand | Plumbright |
Yes, it is designed for compatibility with standard 15mm and 10mm copper and plastic piping.
It is recommended to use new fittings for critical connections, though they can be removed with a release tool if necessary.
No, this is a push-fit system that relies on internal O-rings to create a seal; tape is unnecessary and may cause leaks.
Yes, it is designed to withstand the temperatures and pressures typically found in domestic central heating systems.
A deep scratch on the pipe can prevent the internal O-ring from sealing properly. If the pipe is scratched, trim that section off or use a fresh piece of pipe.
Ensure the pipe is pushed in fully to the internal stop. Check that the pipe end is not scratched or burred.
Check that the pipe is perfectly round and free of debris. Ensure the collet is not being held down during insertion.
To install, ensure the pipe is cut cleanly and squarely using a pipe cutter—avoid hacksaws which can leave burrs. Smooth any sharp edges on the pipe end to prevent damage to the internal O-ring seal during insertion. Push the pipe firmly into the fitting until you feel it hit the internal stop; a slight twist during insertion can assist the process. The fitting is compatible with standard plastic and copper piping of the specified sizes. For care, avoid using aggressive chemicals or cleaners on the fitting. If you ever need to remove the fitting, use a proper collet release tool to retract the grab ring without scratching the pipe surface.
