Ronseal Ultimate Protection Decking Oil - Natural Oak - 5L

The oil provides protection for up to two years, depending on the weather conditions and foot traffic.

It is recommended to remove any existing coatings before applying Ronseal Ultimate Protection Decking Oil. Sand the deck to remove old coatings.

A 5L tin typically covers up to 40 square meters, depending on the wood type and condition.

This oil is suitable for most types of pre-treated decking. Always test in an inconspicuous area before applying to the entire deck.

Clean your decking regularly with a deck cleaner and water. Avoid using harsh chemicals or abrasive cleaners.

A single coat is typically sufficient. However, for heavily weathered decks, a second coat may be needed.

The oil is rainproof in 90 minutes, so light rain should not be an issue. However, avoid heavy rain during the initial drying period to ensure the best results.

While primarily designed for decking, it can be used on other outdoor wooden structures, but always test in a small area first to ensure the desired finish.

Ensure the decking is completely dry before application. Check the weather conditions and avoid applying in damp or humid environments. Make sure you apply a thin, even coat.

Ensure even application. Use a good quality brush or roller and avoid applying too much oil in one area. If necessary, lightly sand the area after drying and reapply.

The final colour can vary based on the type of wood. Always test in an inconspicuous area first. If the colour is still not what you expected, consider applying a second coat.