Best current price£19.22from Handlestore
Shopping.co.uk recommended and popular offers
Handlestore£19.22Visit shop Handlestore Silver Z76 Scrolled Locking Door Handle Pack, 75Mm Sashlock, 3" Hinge
Visit shop
B&Q£23.99Visit shop B&Q - Z76 Scrolled Locking Door Handle PackSilver75mm Sashlock3" HingeHandlestore
Visit shop2 offers from £19.22 - £23.99
View price history by clicking the chart icon.
The HandleStore Z76 Scrolled Locking Door Handle Pack in Silver is designed for homeowners looking to update interior doors with a complete hardware solution. Its key benefit is providing a cohesive and stylish look with matching handles, lock, and hinges. A potential caveat is that the satin chrome finish, while durable, may show fingerprints more readily than other finishes.
| Colour | Silver |
|---|---|
| Model Part Number | Z76 |
| Brand | Handlestore |
The pack includes a pair of Z76 scrolled door handles, a 3-inch (75mm) mortice sash lock, and two 3-inch satin hinges.
No, this handle pack is designed for interior doors only. The mortice sash lock is intended for privacy, not high-security exterior use.
The mortice sash lock has a 3-inch (75mm) backset, meaning the distance from the edge of the door to the center of the spindle hole is 75mm.
This pack is supplied with a specific mortice sash lock. While the handles use a standard spindle, changing the lock would require ensuring compatibility with the handle mechanism and door preparation.
Clean with a soft, damp cloth and mild soap if needed. Always dry thoroughly with another soft cloth. Avoid abrasive cleaners.
Yes, standard 3-inch butt hinges are typically reversible, allowing them to be used on either the left or right side of the door.
Basic tools such as a screwdriver (Phillips and possibly flathead), a tape measure, a pencil, and possibly a chisel and hammer for mortise preparation are typically required.
Check and tighten the handle screws connecting to the spindle or mechanism. Ensure the rose plates are seated correctly.
Ensure the mortice lock is properly aligned within the door. Check for any obstructions in the lock mechanism or the strike plate on the door frame. Lubricate the lock mechanism with a graphite-based lubricant if necessary.
Apply a small amount of lubricant (e.g., WD-40 or silicone spray) to the hinge pins.
Clean the handles and components with a soft, damp cloth and a mild soap solution, then dry thoroughly with a separate soft cloth.
Setup: Installation typically requires basic carpentry skills. Ensure the door is prepared for a mortice lock (a rectangular cavity cut into the edge of the door). The handles attach via screws through the door, connecting to the lock mechanism. The hinges are standard butt hinges and screw directly into the door and frame.
Compatibility: This pack is designed for standard interior doors. The 3-inch (75mm) mortice sash lock is a common size, but always measure your existing lock's backset and the door's thickness to confirm compatibility before purchase. The hinges are standard 3-inch size.
Care: To maintain the satin chrome finish, clean with a soft, damp cloth. Avoid abrasive cleaners or scouring pads, as these can scratch the surface. For stubborn marks, a mild soap solution can be used, followed by drying with a clean, soft cloth.
