AEG Washing Machine Door Seal Gasket - 1108590900
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for AEG washing machine owners experiencing leaks or mold around the door. The key benefit is restoring your machine's seal to prevent water damage and maintain hygiene. A caveat is that installation requires some technical comfort. This genuine AEG replacement door seal gasket (Part No 1108590900) is designed to fit a wide range of AEG washing machine models, ensuring a precise fit and restoring your appliance's functionality.
All features
| Model Part Number | 1108590900 |
|---|---|
| Brand | AEG |
Extended Product Information
FAQs
How do I know if I need to replace my washing machine door seal?
You likely need a new seal if you notice water leaking from the door during operation, or if the current seal is visibly cracked, torn, brittle, or covered in persistent mold or mildew that cannot be cleaned off.
Is this part compatible with all AEG washing machines?
No, this part (1108590900) is designed for specific AEG washing machine models. Please check the provided list of compatible models or consult your washing machine's manual or AEG support to confirm compatibility with your appliance.
Do I need special tools to install the door seal?
While not always strictly necessary, a set of plastic trim removal tools can be helpful for safely prying off the old seal and retaining clips without damaging the washing machine. A screwdriver might also be needed for some models.
How long does it take to replace the door seal?
For users with some mechanical comfort, replacing the door seal typically takes between 30 minutes to 1 hour. The complexity can vary slightly depending on the specific washing machine model.
What should I do if the new seal feels stiff?
New rubber parts can sometimes be a bit stiff. Ensure it is correctly seated. Running a hot empty cycle after installation can sometimes help soften the rubber and allow it to settle into its final position.
Can I use bleach to clean the door seal?
While bleach can clean mold, it can also degrade rubber over time. It's generally recommended to use a mild detergent, a dedicated appliance cleaner, or a mixture of vinegar and water for cleaning the seal to maintain its integrity.
Troubleshooting
Water leaking from the door after installation.
Ensure the seal is correctly seated all the way around the door opening. Check that the retaining ring or clips are securely fastened. Verify that no foreign objects are obstructing the seal.
New seal does not fit properly.
Double-check that the part number 1108590900 is indeed compatible with your specific AEG washing machine model. An incorrect part will not fit correctly.
Difficulty removing the old seal.
Be patient and work slowly. The old seal may be brittle or stuck due to detergent buildup. Use a plastic trim removal tool or a flat-head screwdriver carefully to avoid damaging the washing machine's housing.
Mold or mildew reappears quickly.
Ensure you are wiping the seal dry after use and leaving the door ajar. Regular cleaning with a mild disinfectant solution may be necessary if the problem persists, indicating a need for more frequent maintenance.
Pros and Cons
Pros
- Ensures proper fit and function for compatible AEG models.
- High-quality material for long-lasting durability.
- Restores machine's ability to hold water securely.
- Helps maintain a cleaner and more hygienic laundry environment.
- Genuine part reduces the risk of compatibility issues.
Cons
- Requires manual installation, which may be challenging for some users.
- Specific model compatibility needs to be confirmed before purchase.
- Does not include installation tools or instructions.
- Potential for damage if not installed correctly.
Setup, Compatibility & Care
Compatibility:
Before purchasing, verify that your AEG washing machine model is listed as compatible with part number 1108590900. Common compatible models include the L5460DFL, L6460FL, L74550, and LAV70330-W series, among many others. Always cross-reference your appliance's model number with the manufacturer's specifications or consult customer support.
Setup (Installation):
- Safety First: Ensure the washing machine is unplugged from the power source and the water supply is turned off.
- Access the Seal: Open the washing machine door and carefully peel back the old rubber seal. It is typically held in place by a retaining ring or clips.
- Remove Old Seal: Gently remove the old seal, noting how it was positioned.
- Clean the Area: Thoroughly clean the area where the seal attaches to the machine, removing any lint, detergent residue, or mold.
- Install New Seal: Position the new AEG Door Seal Gasket according to its original placement. Ensure it is seated evenly around the opening.
- Secure the Seal: Reattach any retaining rings or clips to firmly secure the new seal in place. The lip of the seal should typically face inwards.
- Final Check: Close the door and ensure the seal is properly seated all the way around. Plug the machine back in and turn on the water supply.
Care:
To prolong the life of your new door seal and maintain hygiene:
- Wipe down the seal after each wash, especially after dark or heavily soiled loads.
- Leave the washing machine door slightly ajar between uses to allow air circulation and prevent moisture buildup.
- Periodically clean the seal with a mild detergent and a damp cloth to remove any residue or prevent mold growth. Avoid abrasive cleaners.