Polypipe Waste Solvent Weld ABS Swept Bend - 32mm x 92.5deg - White

For optimal performance and a secure bond, use a solvent cement specifically designed for ABS pipework, as recommended by Polypipe.

No, this ABS fitting is designed for ABS solvent weld systems only and is not compatible with PVC or other pipe materials.

ABS solvent weld systems are typically rated for hot and cold water applications found in residential settings, but prolonged exposure to very high temperatures should be avoided. Consult Polypipe technical data for specific temperature limits.

Use a clean, damp cloth. Ensure the fitting is completely dry before applying solvent cement for a proper weld.

This fitting is designed for above-ground residential waste systems. For underground applications, please refer to Polypipe's specific drainage system components suitable for burial.

The 92.5° angle provides a smoother transition for waste flow compared to a sharp 90° bend, reducing the likelihood of blockages and improving system efficiency.

Ensure correct application of ABS solvent cement, adequate curing time, and that the pipe was fully inserted into the socket. Re-cut pipe and fitting, clean surfaces, and re-weld if necessary.

Verify that the 92.5° swept bend is correctly oriented for optimal flow. Check for potential obstructions further down the waste line. Ensure no debris was left in the pipe during installation.

Ensure both pipe end and fitting socket are clean and free of debris. A slight chamfer on the pipe end can aid insertion. Do not force the pipe; excessive force can damage the joint preparation.