SINTER - 12 MAGURA (4 Piston, 4 Pads) Disc Brake Pads - RACE
Best current price£22.99from Tredz
Best offers
Shopping.co.uk recommended and popular offers
Tredz£22.99Visit shop Sinter Blue Magura Brake Pads Size 12
Visit shopTredz£22.99Visit shop One Offer
1 offer from £22.99
View price history by clicking the chart icon.
Product Information
Full details
These SINTER RACE disc brake pads are designed for demanding cyclists, particularly those using Magura MT Trail, MT5, MT5 eStop, MT5e, and MT7 calipers, who need extreme braking performance across varied temperature conditions. Their key benefit is maintaining ultimate power and control, even under aggressive riding and potential overheating scenarios. A potential caveat is that their aggressive compound may offer slower wear across all temperatures, making them especially suitable for e-bikes and heavier bicycles, which could translate to a longer lifespan but potentially different modulation than organic pads for some riders.
All features
| Series | RACE |
|---|---|
| Model Part Number | SIN730120347 |
| Brand | Sinter |
Extended Product Information
FAQs
Are these pads suitable for all weather conditions?
The RACE compound is designed for extreme performance in diverse temperature conditions, excelling particularly when overheating is a concern. While functional in various conditions, their primary design focus is on high-heat, aggressive braking scenarios.
How do I know if these pads are compatible with my brakes?
These pads are specifically designed for Magura MT Trail (FW), MT5, MT5 eStop, MT5e, and MT7 brake calipers. Always confirm your caliper model before purchasing.
What is the recommended break-in procedure?
It is recommended to bed in new pads for optimal performance. Gently apply the brakes repeatedly while walking the bike, and then perform a few moderate stops from a slow speed. Avoid hard, sudden stops during the bedding-in process.
Will these pads make my brakes quieter?
The RACE compound is designed for performance, which can sometimes result in slightly more noise than organic pads, especially during initial use. Proper bedding-in and clean components usually lead to quiet operation.
How often should I check my brake pads for wear?
It's recommended to inspect your brake pads regularly, for example, every few hundred miles or before significant rides. Replace them when the friction material is worn down to the backing plate or to a minimum thickness of approximately 1mm.
Can these pads be used on e-bikes?
Yes, these pads are particularly suitable for e-bikes and other heavy bicycles due to their slow wear characteristics across all temperature conditions and their ability to provide consistent braking power.
Troubleshooting
Brakes feel spongy or lack power after installation.
Ensure the brake system is properly bled and that there are no air bubbles. Re-bed the brake pads to ensure they are making full contact with the rotor. Check that the brake fluid level is correct.
Squealing or noisy brakes.
Clean the brake rotor and pads. Check for proper pad alignment within the caliper. Ensure the pads have been properly bedded in. Uneven rotor wear can also cause noise.
Brake fade during long descents.
This is unlikely with RACE compound pads if installed correctly. Ensure the rotors are clean and not excessively worn. Check that the brake fluid is not old or contaminated, as this can lower its boiling point.
Pads wear out very quickly.
While designed for slow wear, extremely aggressive riding or contamination can accelerate wear. Ensure proper bedding-in procedure was followed. Check for any debris or foreign material on the pads or rotor.
Pros and Cons
Pros
- Exceptional braking performance in varying temperatures.
- Maintains high control and power during aggressive riding.
- Resistant to brake fade, crucial for long descents.
- Extended pad life, especially beneficial for heavier bikes and e-bikes.
- Offers consistent stopping power and good lever modulation.
Cons
- May wear faster than organic pads on lighter bikes in less demanding conditions.
- The aggressive compound might require a brief break-in period.
- Not specifically designed for extreme wet or muddy conditions where organic pads might perform differently.
- Potential for slightly higher initial cost compared to standard organic pads.
Setup, Compatibility & Care
Compatibility: These brake pads are specifically designed for Magura calipers, including MT Trail (FW), MT5, MT5 eStop, MT5e, and MT7 models. Always ensure your brake system is compatible before installation.
Setup:
- Ensure the brake caliper and rotor are clean.
- Carefully remove the old brake pads following your brake manufacturer's instructions.
- Install the new SINTER RACE pads, ensuring they are seated correctly and the retaining pins/clips are secure.
- It is recommended to bed in new brake pads for optimal performance. Gently apply the brakes repeatedly while walking the bike, and then perform a few moderate stops from a slow speed. Avoid hard, sudden stops during the bedding-in process.
Care:
- Keep brake pads and rotors clean. Avoid contact with lubricants or solvents.
- Inspect pads regularly for wear. Replace when the friction material is worn down to the backing plate or to a minimum thickness (typically 1mm).
- If braking performance diminishes, clean the rotor and check pad wear. Bedding in the pads again might be necessary.