Best current price£7.62from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£7.62Visit shop Stannol 830321 Mini-Fluxer X33S-07i Flux Pen 10ml
Visit shop1 offer from £7.62
View price history by clicking the chart icon.
The Stannol Mini-Fluxer X33S-07i is a precision soldering tool designed for electronics hobbyists, technicians, and engineers who perform repairs on PCBs, fine-pitch components, and surface-mount devices (SMD). It provides a controlled, efficient way to apply flux for cleaner, more reliable solder joints, though it is specifically formulated as a no-clean flux that should be evaluated for its suitability in your specific environmental humidity conditions.
| Model Part Number | 830321 |
|---|---|
| Brand | Stannol |
This is a no-clean flux, meaning residues are designed to be left on the board in most applications. However, if your project requires an ultra-clean aesthetic, you can remove it using suitable flux cleaner.
Yes, the X33S-07i chemistry is fully compatible with both traditional leaded and modern lead-free solder alloys.
When properly capped and stored in a cool environment, the pen will maintain its effectiveness for a long period, though it should be used within reasonable professional standards.
The flux is non-conductive and non-corrosive, making it safe for use on high-density circuits.
The pen is intended for one-time use; it is not designed to be opened or refilled.
Ensure the cap has been removed and press the tip firmly against the workpiece to depress the internal spring valve.
Gently clean the tip with a small amount of isopropyl alcohol and allow the flux to saturate the fibers by pressing it against a board.
Setup: To begin using the pen, gently press the felt tip against a stable surface until the flux saturates the applicator. Avoid excessive pressure to prevent pooling.
Compatibility: This flux is compatible with standard leaded and lead-free solder alloys used in modern electronics manufacturing.
Care: Always replace the cap securely after each use to prevent the internal solvents from evaporating. Store in a cool, dry place out of direct sunlight. If the applicator tip becomes contaminated with solder residue, gently wipe it with an isopropyl alcohol-dampened cloth to restore flow.
