Feltgard Strips 13mm x 153mm

You can use standard scissors or a craft knife to cut the Feltgard strips to your desired shape and size. Ensure you have a stable surface for cutting and are careful when using sharp tools.

The best way is to ensure the surface is clean and dry, peel off the backing, and press firmly onto the furniture leg for at least 30 seconds. Allow the adhesive to set before use.

The adhesive is designed for a strong, semi-permanent bond. Reusing the strips after removal is generally not recommended as the adhesive's effectiveness will be compromised.

Felt is generally not ideal for outdoor use as it can degrade when exposed to moisture and the elements. These strips are best suited for indoor applications.

The lifespan varies depending on the amount of traffic and friction the furniture leg experiences. With regular use, they can last several months to over a year before needing replacement.

This note indicates that the actual number of strips included in the package is specified elsewhere in the product listing (e.g., title, description, or specifications) and not necessarily indicated by the product images.

Ensure the furniture surface is thoroughly cleaned and dried before application. Remove all dust, dirt, and oils. Press firmly for at least 30 seconds.

The surface may not have been adequately prepared. Re-clean the surface and reapply the strip, ensuring consistent pressure. Avoid moving the furniture immediately after application.

Check if the strips are evenly applied and making full contact with the floor. Ensure the correct size is being used and that the felt has not become excessively compressed or worn.

These strips are 13mm thick. If a thinner profile is needed, consider cutting them to size or using a different product. However, the thickness contributes to their cushioning effect.