Shopping.co.uk

Bartoline Ready Mix Fine Surface Filler - 1876

Bartoline Ready Mix Fine Surface Filler - 1876

Bartoline 1876 Ready Mixed Fine Surface Filler is a high quality ready to use filler developed for...

Best current price£15.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£15.99Visit shop

4x Bartoline 1876 Ready Mix Fine Surface Filler Repair Small Hole Dent Nick 600g

Visit shop

All Offers

3 offers from £15.99 - £20.99

View price history by clicking the chart icon.

eBay4x Bartoline 1876 Ready Mix Fine Surface Filler Repair Small Hole Dent Nick 600g
Free delivery in 1–3 days
£15.99
Visit shop
B&QB&Q - 4X 1876 Ready Mix Fine Surface Filler Repair Small Hole Dent Nick 600G
Free delivery in 1–3 days
£20.99
Visit shop

Product Information

Full details

The Bartoline Ready Mix Fine Surface Filler is designed for professional decorators and DIY enthusiasts who require a high-quality, pre-mixed solution for achieving flawless interior surfaces. Its primary benefit is the exceptionally smooth, white finish it provides for minor imperfections, though users should note that it is strictly for fine repairs and is not suitable for deep structural patching without prior layering or the use of an all-purpose alternative.

All features

Model Part Number1876
BrandBartoline

Extended Product Information

FAQs

Can I use this filler on exterior surfaces?

No, this product is specifically formulated for interior surfaces only.

Does it need to be primed before painting?

While it can be painted directly, using a suitable primer or mist coat is recommended for the best adhesion and finish.

How do I clean my tools after use?

Clean all filling tools with warm water immediately after use before the filler sets.

Can I use this for filling deep holes?

It is not recommended for deep holes. Use a dedicated all-purpose filler for bulk filling and finish with this product for the top layer.

How do I prevent nail heads from rusting through the filler?

Always touch in nail and screw heads with an oil-based paint or primer before applying the filler.

Troubleshooting

Filler is pulling out of the crack during smoothing

The crack may be too narrow; slightly enlarge the opening to allow the filler to key into the surface better.

Filler feels gritty or hard inside the container

The container was likely not sealed properly or exposed to extreme temperatures; discard the damaged portion and keep the lid tightly sealed in the future.

Repair is shrinking significantly after drying

You may have applied the filler too thick in one pass; build up repairs using multiple thin, dried layers instead.

Pros and Cons

Pros

  • Convenient ready-mixed formula saves significant prep time
  • Extraordinarily smooth finish minimizes the need for heavy sanding
  • Excellent compatibility with standard interior wall and woodwork paints
  • Strong adhesive properties ensure long-lasting repairs

Cons

  • Not intended for deep structural fills without layering
  • Must be protected from frost during storage to prevent degradation
  • Requires professional technique to avoid over-sanding

Setup, Compatibility & Care

  1. Preparation: Ensure the target area is completely dry, clean, and free of dust or loose debris.
  2. Surface Prep: For highly absorbent surfaces like bare plaster, lightly moisten the area with water before application to prevent the filler from drying too quickly.
  3. Application: Stir the product if necessary to regain a smooth consistency. Apply in thin layers. For repairs deeper than a few millimeters, apply multiple thin layers rather than one thick glob, or use an all-purpose filler first.
  4. Finishing: Fill slightly proud of the surface, then use a fine-grit abrasive to sand flush once dry.
  5. Storage: Always seal the lid tightly immediately after use. Store in a cool, dry place and keep strictly away from freezing temperatures to maintain the paste consistency.

Price History

DatePrice
Visit shop