Bonda Woodstop Wood & Grain Filler - Pine - 250ml

Bonda Woodstop is best suited for filling small holes, splits, and minor surface imperfections. For larger gaps or deeper areas, multiple thin layers may be required, or a different type of filler designed for larger volumes might be more appropriate.

The filler is rapid-drying. The exact drying time can vary based on application thickness, humidity, and temperature, but it is typically ready for sanding and finishing within approximately one hour.

While primarily designed for solid wood, it can be used on engineered wood products and MDF for small repairs. Ensure good adhesion and consider applying a primer before painting.

Keep the filler in its original container with the lid tightly sealed. Store in a cool, dry place away from direct sunlight and extreme temperatures to maintain its consistency and usability.

The product weighs approximately 0.59083886216 Pounds.

The 'Pine' color is a general match for pine wood. However, wood tones can vary significantly. It is recommended to test the filler's color and finish on an inconspicuous area or be prepared to paint or varnish the repaired area for a perfect match.

Ensure the container has been properly sealed after previous use. If the product is old and has dried out significantly, it may be time to replace it.

This can happen with thicker applications. For deeper holes or splits, apply the filler in thin layers, allowing each layer to dry before applying the next.

Ensure you are using appropriate grit sandpaper and that the filler is fully cured before sanding. Start with a coarser grit and finish with a finer grit for a smoother result.

Confirm that the filler is completely dry and that the surface has been adequately sanded. A light sanding before priming or painting can improve adhesion.