Best current price£8.56from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£8.56Visit shop Sip Industrial Products Limited Light Sip 1.6Mm X 1Kg E6013 Mild Steel Arc Electrodes 02769
Visit shop
B&Q£24.01Visit shop B&Q - 1.6mm X 1Kg E6013 Mild Steel Arc ElectrodesL2 X W30 X H4.5 Cm
Visit shop2 offers from £8.56 - £24.01
View price history by clicking the chart icon.
The SIP 1.6mm x 1kg E6013 Mild Steel ARC Electrodes are designed for general ARC welding applications, offering a reliable choice for both beginners and experienced welders. Their rutile-based flux coating ensures stability and ease of use across all positions, making them ideal for light to medium fabrication, sheet metal work, and common repairs. While versatile, they are best suited for thinner materials and may require specific technique for thicker gauges.
| Model Part Number | E6013 |
|---|---|
| Brand | SIP |
These electrodes are suitable for both AC and DC ARC welding machines. Ensure your machine is set to the correct polarity and amperage range for 1.6mm electrodes.
The recommended amperage range is typically between 30-70 Amps, but this can vary based on the specific welding machine, material thickness, and welding position. Always consult your welding machine's manual for specific recommendations.
While E6013 electrodes can be used on galvanized steel, care must be taken as the zinc coating can produce noxious fumes. It's best to weld in a well-ventilated area and consider removing the coating from the weld area if possible.
Store electrodes in a dry, sealed container or their original packaging. Avoid humid environments. If electrodes become damp, they may need to be re-baked before use.
These E6013 electrodes are generally suitable for light to medium fabrication and general repairs. For critical structural applications requiring specific mechanical properties, higher strength electrodes may be recommended.
E6013 is an electrode classification. 'E' stands for electrode, '60' indicates a minimum tensile strength of 60,000 psi, and '13' refers to the type of flux coating and welding position capabilities (all-position, AC/DC).
After the weld cools, use a chipping hammer to break away the bulk of the slag. Then, use a wire brush to clean any remaining residue from the weld bead.
Check power supply and ensure machine is on. Verify correct polarity for the electrode type. Ensure the workpiece and electrode tip are clean. Try a different electrode from the pack.
Check amperage setting; it may be too high. Ensure electrodes are dry; store them in a moisture-free environment. Clean the workpiece surface of rust, paint, or oil.
Reduce amperage slightly. Ensure correct arc length is maintained – keep the electrode tip close to the weld pool. Verify electrode is not damp.
Ensure proper technique is used, especially in out-of-position welding. Remove slag completely between passes. Check that the arc length is not too long.
Compatibility: These electrodes are designed for use with standard DC or AC ARC welding machines. Ensure your welding machine is set to the correct polarity and amperage for 1.6mm E6013 electrodes, typically ranging from 30-70 Amps depending on the material thickness and welding position. They are compatible with most SIP ARC welding machines and other standard welding equipment.
Setup: Ensure electrodes are kept dry. If the flux coating appears damp or chalky, they may need to be reconditioned by baking in a dedicated electrode oven at approximately 150°C (300°F) for one hour. Store unused electrodes in their original packaging or a sealed container in a dry environment.
Care: After welding, allow the deposited slag to cool completely before attempting to remove it, typically using a chipping hammer and wire brush. Clean the weld area thoroughly to remove any remaining slag or spatter for inspection.
