Weed Control Mat Membrane Pegs + Buffer Washer Pegs - 25 Set

The pegs are made of galvanised steel, providing durability and resistance to rust.

The buffer washer helps to distribute the pressure from the peg over a larger area of the fabric, reducing the risk of the peg tearing through the material and providing a more secure hold.

This set contains 25 galvanised U-shaped ground pegs along with 25 corresponding buffer washers.

No, the set of 25 pegs and washers does not include a removal tool.

Yes, they can be used on slopes, but ensure they are hammered in securely to prevent slippage. Placing them slightly angled downhill can sometimes improve grip.

A general guideline is to space them every 30-50cm. Adjust spacing based on the weight of the fabric, wind conditions, and ground type. Closer spacing provides a more secure hold.

They are suitable for both. While designed for durability, they are easily removed if needed, making them practical for temporary setups, yet robust enough for longer-term anchoring.

Ensure the ground is adequately moist. If the ground is very hard or rocky, consider using a rubber mallet or hammer to gently tap the pegs in. For extremely tough conditions, a different anchoring method might be necessary.

Ensure the buffer washer is correctly positioned between the fabric and the peg head. If tearing persists, you may need to use additional pegs or a heavier-duty fabric. The washer helps distribute pressure, so check its placement.

Check if the pegs are fully inserted into the ground. Ensure they are placed at appropriate intervals (closer together for windy areas or heavier fabrics). The ground itself might be too loose or soft; consider using pegs at closer intervals or a more robust anchoring solution if the soil is very sandy or loose.