Siemens Washer Dryer - E Rated

The Reload function allows you to pause the current wash or dry cycle to add or remove items from the drum. Simply press the 'Start/Pause' button, wait for the door to unlock, add your item, close the door, and press 'Start/Pause' again to resume the cycle. It's not available when the water level is too high or the drum is too hot.

The autoDry feature uses sensors that monitor the moisture levels within the drum. Once the desired dryness level is reached, the appliance automatically stops the drying cycle. This prevents over-drying, which can cause excessive heat exposure and lead to shrinkage, particularly in sensitive fabrics.

The washer dryer has an 8kg wash capacity, meaning it can hold up to 8kg of dry laundry for washing. However, the drying capacity is 5kg. This means that after washing, you should remove at least 3kg of laundry before starting a drying cycle to ensure efficient and effective drying. Drying a full 8kg load is not recommended.

The varioSpeed function is designed to reduce cycle times for a proper clean, but it is generally suitable for most everyday fabrics. For very delicate items, it's always recommended to use specific delicate programs. Always check garment care labels.

It is recommended to clean the lint filter after every drying cycle. A clogged lint filter restricts airflow, reducing drying efficiency and increasing energy consumption. It can also pose a fire hazard.

This Siemens washer dryer has an energy efficiency rating of E. While functional, it's important to note that models with higher ratings (e.g., A, B, C) are generally more energy-efficient and can lead to lower electricity bills over time.

Check if the power cord is securely plugged in. Ensure the door is properly closed. Verify that the 'Start/Pause' button has been pressed and the program is selected.

Check the drain hose for kinks or blockages. Ensure the drain hose is not inserted too far into the standpipe. Clean the pump filter, as it may be clogged with lint or debris.

Ensure the appliance is level and stable on the floor. Check that transit bolts have been removed from the rear of the machine (if it's a new installation). Avoid overloading the drum.

Ensure the drying load does not exceed the 5kg capacity. Check that the lint filter is clean. Verify that the correct drying program has been selected and autoDry sensors are not obstructed.

Consult the user manual for a specific explanation of the error code and recommended actions. Common solutions involve checking water supply, drainage, or filter cleanliness.