Shopping.co.uk

Bartoline Fix Grout Wall Tile Powder - White

Bartoline Fix Grout Wall Tile Powder - White

Bartoline Waterproof Wall Tile Grout is a cement-based powdered grouting compound. Can be used on ...

Best current price£16.99from eBay

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
eBay£16.99Visit shop

4x Bartoline Fix Grout Wall Tile Powder Fully Waterproof Cement-Based White 500g

Visit shop

All Offers

3 offers from £16.99 - £20.99

View price history by clicking the chart icon.

eBay4x Bartoline Fix Grout Wall Tile Powder Fully Waterproof Cement-Based White 500g
Free delivery in 1–3 days
£16.99
Visit shop
B&QB&Q - 4X Fix Grout Wall Tile Powder Fully Waterproof Cement-Based White 500G
Free delivery in 1–3 days
£20.99
Visit shop

Product Information

Full details

This Bartoline Fix Grout Wall Tile Powder in White is designed for DIY enthusiasts and professionals looking to achieve a clean finish on tile joints up to 3mm wide. Its key benefit is its versatility, suitable for kitchens, bathrooms, showers, and even external applications. A potential caveat is the need for precise water mixing to achieve the correct consistency for optimal results.

All features

ColourWhite
Model Part NumberFX3220
BrandBartoline

Extended Product Information

FAQs

What is the maximum joint width this grout can be used for?

This Bartoline Fix Grout is suitable for joints up to 3mm wide.

Can I use this grout for floor tiles?

This product is specifically designed for wall tiles and joints up to 3mm. For floor tiles, a different type of grout may be more appropriate.

How much area does 500g of grout cover?

Approximately 2 square metres per 500g, but this coverage will vary depending on the width and depth of the tile joints.

How long should I wait before exposing the grouted area to water?

The grouted area should be protected from water and frost until the grout is completely dry, typically overnight.

What is the mixing ratio for the grout powder?

The recommended mixing ratio is approximately 2 parts grout powder to 1 part cold water.

How do I clean my tools after using the grout?

All tools and mixing bowls should be cleaned with water before the grout hardens.

Can this grout be used outdoors?

Yes, this grout is suitable for use both internally and externally.

Troubleshooting

Grout is too dry or crumbly

Add a small amount of water and re-mix thoroughly until a smooth paste is achieved.

Grout is too wet or runny

Add a small amount of grout powder and mix well until the desired consistency is reached. Avoid adding too much water initially.

Uneven grout lines

Ensure consistent pressure when applying with the grout float. Use a grout shaper to neaten edges after initial setting.

Grout is not hardening

Check that the water-to-powder ratio was correct and that the environment is not too cold or humid. Ensure the area is protected from moisture and frost until fully cured.

Pros and Cons

Pros

  • Suitable for a variety of indoor and outdoor tiling projects.
  • Designed for narrow grout joints (up to 3mm).
  • Provides a durable, waterproof finish.
  • Simple mixing instructions for ease of use.
  • Classic white colour suits many tile styles.

Cons

  • Only suitable for joints up to 3mm wide.
  • Requires careful mixing to achieve the correct consistency.
  • Needs protection from water and frost until fully hardened.
  • Coverage can vary significantly based on grout line width.

Setup, Compatibility & Care

Preparation and Mixing:

  1. Ensure the tile adhesive is completely dry before starting.
  2. Remove any tile spacers from between the tiles.
  3. In a clean container, add approximately 2 parts of Bartoline Fix Grout powder to 1 part cold water.
  4. Mix thoroughly to achieve a smooth, lump-free paste.
  5. Allow the mixture to stand for approximately 10 minutes.
  6. Re-stir the grout before application.

Application:

  1. Push the grout into the tile joints using a grout float, ensuring all gaps are filled.
  2. Allow the grout to harden slightly for a few minutes.
  3. Remove excess grout using a damp cloth or sponge.
  4. Once the grout has hardened slightly, use a grout shaper to neaten the joints.
  5. Leave the grouted areas to harden fully overnight.
  6. Polish the tiles with a dampened cloth.
  7. Protect the newly grouted areas from water and frost until the grout is completely dry.

Cleaning:

Clean all tools and mixing bowls with water immediately after use, before the grout hardens.

Storage:

Store the product in a dry place. Keep the sachet tightly closed after use.

Price History

DatePrice
Visit shop