Hycote Colour Spray Paint - Royal Blue - 150ml

The manufacturer paint code for this specific Royal Blue is G/JH/937.

Yes, this paint is compatible with plastics and can be used on interior parts, provided the surface is properly prepared and clean.

The paint is fast drying. Allow approximately 10-15 minutes between light coats. Full curing time will vary depending on temperature and humidity.

While it can adhere to many surfaces, using a primer is recommended, especially on bare metal or plastics, to ensure optimal adhesion and a uniform finish.

For best results, apply multiple light, even coats rather than one thick coat. Allow 10-15 minutes drying time between each coat. The number of coats depends on the desired opacity and finish.

The 'double coverage' means the can contains significantly more paint relative to the amount of propellant compared to standard aerosols, offering more paint per can and potentially covering a larger area or providing a thicker coat.

Yes, this paint is suitable for use on wood surfaces, provided they are clean, dry, and properly prepared.

Shake the can more vigorously for a longer period (at least 2 minutes). Ensure the nozzle is not blocked. Try clearing the nozzle by spraying upside down after use.

The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants. Lightly abrading the surface before painting can improve adhesion. Ensure compatibility with existing finishes.

Applying paint too thickly or too close to the surface. Use lighter, more even coats and maintain the recommended spray distance (25-30cm). Allow adequate drying time between coats.

Ensure the can has been shaken sufficiently. The 'double coverage' refers to the paint volume compared to propellant, not necessarily covering double the area of a standard can of the same physical size if applied thickly. Apply thin, even coats.