Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, algae, and moss. Clean the surface thoroughly before application. Use a suitable cleaner if required.
- Application Tools: You can apply Everbuild 402 Water Seal using a roller, brush, or low-pressure garden sprayer.
- Application: Apply evenly, avoiding puddles. Apply two coats for porous surfaces, allowing the first coat to dry before applying the second.
Compatibility
Everbuild 402 Water Seal is compatible with brick, concrete, render, stone, and pebble dashing. It is not suitable for rubber, plastic, or timber.
Care
- After application, allow the surface to fully dry according to the manufacturer's instructions. Usually, drying time is 24 hours.
- Clean up any spills immediately with water.
- Store the product in a cool, dry place, away from direct sunlight.