PIR Occupancy Sensor - Ovia Lighting - White

The sensor has a 360-degree detection angle. The effective detection range depends on the mounting height and environmental factors, but it is designed for comprehensive coverage.

The sensor has an IP65 rating, which means it is protected against dust and low-pressure water jets, making it suitable for damp or dusty indoor environments. It is not designed for direct exposure to heavy rain or harsh outdoor weather.

Adjustment of the time delay is typically done via a potentiometer or switch on the sensor itself. Refer to the product manual for specific instructions on accessing and adjusting these settings.

Yes, this PIR occupancy sensor is generally compatible with most lighting types, including LED, fluorescent, and incandescent, provided the total load does not exceed the sensor's maximum power rating.

IP65 means the enclosure is dust-tight and protected against water jets from any direction. This ensures its durability in environments where dust or moisture may be present.

Refer to the product manual for details on manual override functionality. Some models include options for manual on/off control via the light switch.

Ensure power is on, check wiring connections, verify the sensor is within its detection range, and confirm the tilt angle is appropriate. Adjust sensitivity settings if available.

Check for any persistent heat sources or movement within the detection zone. Verify the time delay setting is not set to maximum. Reset the sensor if possible.

Ensure there is no continuous movement detected. Check that the time-delay setting is appropriate for the expected occupancy duration.

Check the power supply and all wiring connections. If the issue persists, the sensor may need replacement.