Bosch Parallel and Angle Guide - 2 607 001 079

This guide is compatible with the Bosch GBS 75 AE Professional, PBS 7A, PBS 7AE, and PBS 60 belt sander models.

No, this guide is designed to be attached to compatible Bosch belt sanders to provide a stable reference for parallel or angled sanding. It is not intended for freehand use.

The guide typically features an adjustment mechanism that allows you to set and lock it at various fixed angles. Refer to the specific markings or adjustment knob on the guide itself.

The main benefit is achieving highly precise and repeatable sanding results, whether sanding parallel to an edge or at a specific angle, thereby improving workflow efficiency and finish quality.

Clean the guide with a soft brush or a dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.

The approximate dimensions are 45cm x 40cm x 25cm, with a height of 70mm.

The design primarily caters to standard right-handed operation, but its functionality for parallel and angled guidance can often be adapted depending on the specific sanding task and user preference.

Ensure the guide is correctly aligned with the mounting points on the sander and that all locking mechanisms or screws are fully tightened. Check for any debris obstructing the attachment points.

Verify that the guide is set precisely to the desired parallel or angle setting. Ensure the belt sander's sanding belt is properly tensioned and in good condition. Check that the workpiece is held firmly against the guide.

Confirm that you are using a compatible Bosch belt sander model. Check the mounting points on both the sander and the guide for any obstructions or damage. Refer to your sander's manual for specific attachment instructions.