Sikagard Universal 5 Star Wood Treatment - 5 Litre - Sika

One litre covers approximately 3 square meters.

No, remove any existing coatings first. The product needs to be absorbed into the wood to be effective.

While the formula is solvent-free, it's best to keep pets and children away from the treated area until it is completely dry.

For general protection, one or two coats are usually sufficient. Heavily exposed or infested wood may benefit from multiple coats.

Yes, it can be used on decking. Ensure proper surface preparation and consider reapplication as needed due to foot traffic and weather exposure.

Wipe up spills immediately with a clean cloth. Dispose of the cloth properly, following local regulations.

Refer to the product label for the specific shelf life. Store the product in a cool, dry place, and keep the container tightly sealed when not in use.

Ensure the wood surface is clean and free of existing coatings. Lightly sand the surface if necessary to improve absorption.

This may indicate over-application. Wipe off the excess with a clean cloth, and ensure proper ventilation for drying.

Apply the treatment evenly, avoiding drips and runs. Use a brush or roller to smooth out any imperfections while the product is wet.

Ensure thorough treatment of all surfaces, including hard-to-reach areas. Heavily damaged wood might require multiple applications or additional treatments.