ROAR 610 Plus Extreme Cutting Polish Compound - 500g
Best current price£22.20from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£22.20Visit shop ROAR 610 PLUS EXTREME CUTTING POLISH COMPOUND 500G - POLISHING VALETING
Visit shopeBay£22.20Visit shop All Offers
2 offers from £22.20 - £23.99
View price history by clicking the chart icon.
eBayROAR 610 PLUS EXTREME CUTTING POLISH COMPOUND 500G - POLISHING VALETING
Free delivery in 1–3 days
£22.20
Visit shop
OnBuy.comRoar 610 Plus Extreme Cutting Polish Compound 500G - Polishing Valeting 5060771561150
Free delivery in 1–3 days
£23.99
Visit shop
Product Information
Full details
The ROAR 610 Plus Extreme Cutting Polish Compound is an ideal choice for professional automotive detailers and enthusiasts seeking a high-performance solution for heavy-duty paint correction. This 500g compound excels at quickly eliminating deep scratches, heavy oxidation, and surface imperfections to restore a clean, uniform base; however, users should be aware that its aggressive cutting action requires a follow-up fine-polishing step to achieve a high-gloss, swirl-free finish.
All features
| Model Part Number | ROAR 610 |
|---|---|
| Brand | Roar |
Extended Product Information
FAQs
Is ROAR 610 Plus safe for all paint types?
It is suitable for most automotive clear coats, but always perform a test spot first, especially on softer or older paints.
Can I use this by hand?
While intended for machine polishing to maximize results, it can be used by hand for spot repairs, though efficiency will be significantly lower.
Does this product leave a final shine?
No, this is a cutting compound. It will leave the paint clean but slightly hazy, necessitating a follow-up polishing step.
How much product should I use per panel?
A pea-sized amount or 3-4 small dots on your pad is usually sufficient for a 2ft by 2ft area.
Is this safe for ceramic coating prep?
Yes, it effectively removes old wax and surface defects, creating a clean substrate for ceramic coating application after refinement.
Troubleshooting
Compound drying too quickly on the pad
Reduce the size of the working area and ensure you are not working in direct sunlight or on a hot panel.
Haze remaining after buffing
This is normal for an aggressive cutting compound; follow up with a finer polish and a softer finishing pad.
Pigtails or new scratches appearing
Check your pad for debris or dried compound buildup; clean or replace the pad immediately.
Pros and Cons
Pros
- Excellent for removing deep scratches and severe oxidation
- Speeds up the paint correction process
- Provides a consistent cutting performance
- Ideal for heavy-duty professional detailing tasks
Cons
- Requires a secondary finishing polish for a show-car shine
- Not suitable for light maintenance or soft paint types without testing
- Aggressive abrasive action requires careful technique to avoid burn-through
Setup, Compatibility & Care
To achieve optimal results, use the ROAR 610 Plus with high-density wool or stiff foam cutting pads designed for heavy correction. Always perform a test spot on an inconspicuous area of the paintwork to assess how the clear coat responds to the compound's aggression. When finished, clean your buffing pads thoroughly with warm water and a pad cleaner to prevent hardened product residue from scratching the paint in future uses. Store the container in a cool, dry place, ensuring the lid is tightly sealed to maintain the integrity of the chemical formula.