Festo Rod Clevis - M10x1.25
Best current price£32.43from Tameson UK
Best offers
Shopping.co.uk recommended and popular offers
Tameson UK£32.43Visit shop Festo Rod Clevis M6 Din 71752/Iso 8140 - 13567
Visit shopTameson UK£32.43Visit shop All Offers
3 offers from £32.43 - £61.42
View price history by clicking the chart icon.
Tameson UKFesto Rod Clevis M6 Din 71752/Iso 8140 - 13567
Free delivery in 1–3 days
£32.43
Visit shop
Festo Rod Clevis M8 Din 71752/Iso 8140 - 13568Free delivery in 1–3 days£43.69Visit shop →
Festo Rod Clevis M10x1.25 Din 71752/Iso 8140 - 13569Free delivery in 1–3 days£61.42Visit shop →
Product Information
Full details
This Festo Rod Clevis (MPN CRSG-M10X1,25) is designed for pneumatic or hydraulic actuators requiring a secure, standardized connection point for linear motion. It offers a robust and compliant mounting solution, crucial for maintaining system integrity and preventing premature wear. A key caveat is its specific thread size and bore compatibility, requiring careful matching with the actuator rod and clevis pin.
All features
| Model Part Number | CRSG-M10X1,25 |
|---|---|
| Brand | Festo |
Extended Product Information
FAQs
What does MPN CRSG-M10X1,25 signify?
MPN stands for Manufacturer Part Number. CRSG-M10X1,25 specifically indicates the model series (CRSG) and the thread size (M10x1.25) and pitch of the clevis.
What is the standard followed by this rod clevis?
This rod clevis adheres to DIN 71752 and ISO 8140 standards, ensuring interchangeability and reliable performance within systems designed to these specifications.
Can this rod clevis be used with actuators that do not have a 10mm bore?
No, this rod clevis is specifically designed for actuators with a 10mm bore size and an M10x1.25 threaded rod end. Using it with incompatible sizes can lead to improper fit, reduced performance, and potential failure.
What type of clevis pin should I use?
You should use a clevis pin that meets the DIN 71752/ISO 8140 standards and has a diameter compatible with the clevis eyelet and the mating component's mounting hole, typically an M10 clevis pin with a corresponding bore diameter.
How do I prevent corrosion on the rod clevis?
While designed for industrial environments, regular inspection and cleaning can help prevent excessive corrosion. Ensure the clevis is not exposed to harsh chemicals or constant moisture without adequate protection or maintenance.
What is the maximum angle of articulation for this rod clevis?
The exact maximum angle depends on the specific application and mating components, but standard rod clevises are designed to accommodate typical operational angles for linear actuators in most automation tasks.
Troubleshooting
Clevis does not thread onto actuator rod.
Verify the actuator rod has an M10x1.25 thread. Ensure the thread is clean and free of debris or damage.
Excessive play or looseness in the connection.
Check that the clevis pin is the correct diameter and is securely fastened. Ensure the clevis eyelet and mating component holes are not worn beyond tolerance. Replace components if necessary.
Difficult articulation or sticking.
Inspect the clevis pin and mating surfaces for dirt, debris, or corrosion. Clean thoroughly and apply appropriate lubrication. Ensure the clevis pin is not bent.
Pros and Cons
Pros
- Ensures secure and stable connection for linear actuators.
- Built to international standards for reliable integration.
- Durable design suitable for industrial applications.
- Precise fit for 10mm bore actuators.
Cons
- Limited to specific bore size (10mm) and thread type (M10x1.25).
- Requires compatible clevis pin and mounting hardware.
- Not suitable for applications requiring a direct, fixed linear coupling.
Setup, Compatibility & Care
Setup:
- Ensure the actuator rod end is compatible with a 10mm bore clevis.
- Thread the M10x1.25 rod clevis onto the actuator rod until secure.
- Insert a compatible clevis pin through the clevis eyelet and the mating component's mounting hole.
- Secure the clevis pin with appropriate retaining hardware (e.g., cotter pin, circlip, bolt).
Compatibility:
- Designed for 10mm bore actuators.
- Requires M10x1.25 thread on the actuator rod.
- Compatible with standard clevis pins meeting DIN 71752/ISO 8140 standards.
- Intended for use with Festo components or any system adhering to the specified standards.
Care:
- Regularly inspect for signs of wear, corrosion, or damage.
- Ensure connections remain tight and free of excessive play.
- Lubricate the clevis pin and bearing surface if recommended by the actuator manufacturer for extended life, using appropriate industrial lubricants.