Best current price£10.00from B&Q
Shopping.co.uk recommended and popular offers
B&Q£10.00Visit shop B&Q - Small Brake Cylinder Hone Triple Leg Engine Honing Bore Flexi Glaze Buster
Visit shop2 offers from £10.00
View price history by clicking the chart icon.
This guide is for anyone using the AB Tools Small Brake Cylinder Hone. It helps users understand the tool's features, proper usage, and maintenance to achieve optimal results when honing small bore cylinders. Note that this tool is designed for cylinders between 1" and 2 1/2" (25mm - 63mm).
| Model Part Number | TE751 |
|---|---|
| Brand | AB Tools |
You can use either an electric or air drill. Ensure the drill speed does not exceed 2400 RPM.
Adjust the honing pressure using the knurled nut. It should be firm enough to remove material but not so tight that it damages the cylinder.
Replace the stones when they become worn or no longer effectively remove material from the cylinder walls.
No, this hone is designed for small bore cylinders, such as those in brakes, clutches, and motorcycles. It is not suitable for most engine cylinders.
After each use, clean the hone thoroughly with a cleaning solvent and a brush. Remove any metal particles and debris.
Check the honing stones for wear or damage. Ensure the honing pressure is correctly adjusted and the drill speed is within the recommended range. Make sure the cylinder is clean before honing.
Make sure the hone is properly sized for the cylinder. Apply a light amount of honing oil to ease insertion and removal.
