Shimano ST-4703 Clamp Band Unit - 23.8 mm - 24.2 mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Shimano ST-4703 Clamp Band Unit is an essential genuine replacement component designed specifically for riders using the ST-4703 control unit. It is ideal for cyclists performing drivetrain or cockpit maintenance who need to ensure a secure, manufacturer-specified connection between their shift-brake levers and handlebars. While this part is highly durable, it is strictly engineered for the 23.8 mm to 24.2 mm diameter range, meaning it is not compatible with oversized or non-standard handlebar specifications.
All features
| Model Part Number | 4703 |
|---|---|
| Brand | Shimano Spares |
Extended Product Information
FAQs
Will this fit other Shimano shift-brake levers?
No, this part is specifically designed for the ST-4703 model. Compatibility with other series is not guaranteed.
Does this work with 31.8 mm handlebars?
The clamp diameter of 23.8 mm to 24.2 mm refers to the lever mounting area on the handlebar, which is standard even on handlebars with a 31.8 mm center clamp section.
Can I reuse the old clamp bolt?
It is recommended to use the new bolt provided with the clamp unit to ensure thread integrity and safety.
What tools do I need for installation?
You will typically need a 5mm Allen key, a torque wrench, and new bar tape to finish the job.
Is this part compatible with carbon handlebars?
Yes, provided you do not exceed the handlebar manufacturer's torque limits; always use a torque wrench to be safe.
Troubleshooting
Lever body rotates during use
Check that the clamp band is fully seated and tighten the mounting bolt to the manufacturer's specified torque.
Bolt feels stiff when tightening
Remove the bolt, clean the threads, apply a small amount of bicycle-specific grease, and re-insert carefully to avoid cross-threading.
Pros and Cons
Pros
- Ensures exact manufacturer specification fit
- High durability and corrosion resistance
- Prevents slippage of shift-brake levers
- Straightforward installation for experienced mechanics
Cons
- Compatible only with specific Shimano ST-4703 models
- Limited to standard road handlebar diameters
- Requires specific torque knowledge for safe installation
Setup, Compatibility & Care
To install, remove the current bar tape to expose the lever clamp bolt. Loosen the bolt completely, slide the old unit off, and replace it with the new ST-4703 clamp. Ensure the band is seated correctly within the lever body housing before tightening. This component is strictly designed for 23.8 mm to 24.2 mm handlebars. For care, keep the threads lightly greased to prevent seizing and regularly check the bolt torque after long-distance rides, especially if you experience vibrations on rough road surfaces.