Oxygen Sensor Socket Wrench Insert - Laser - 8590

This socket is designed specifically for 24mm single hex Lambda (Oxygen) sensors.

Yes, it is compatible with any standard 1/2" drive ratchet. It can also be used with a 30mm spanner.

The slot allows the sensor's wiring harness to pass through, enabling the socket to fit onto the sensor without needing to disconnect the wiring first.

No, it is specifically designed for 24mm single hex sensors. A different size socket (like the 22mm Part No. 8063) may be required for other sensor types.

It is manufactured from durable chrome molybdenum steel with a black phosphate finish.

The socket has a short series length of 70mm, making it suitable for tight access areas.

Yes, the combination of the 1/2" drive ratchet option and the robust construction allows for significant torque application, which can help loosen seized sensors.

Verify that the sensor is a 24mm single hex type. If it is a different size or hex configuration, this socket will not fit. Consider the 22mm alternative (Part No. 8063) if applicable.

Ensure a secure fit of the ratchet or spanner onto the socket. If using a ratchet, confirm it is properly engaged. For extremely tight sensors, a longer-handled ratchet or breaker bar may be necessary, but use caution to avoid damaging the sensor or exhaust component.

Ensure the harness is properly aligned with the slot. Some sensor connectors may be bulkier; try to manipulate the harness to pass through. If the connector is too large, this socket's design may not be suitable for that specific sensor.