Autochem Blue Antifreeze Coolant Concentrate - Tetrosyl - ABL001

Autochem 2 Year antifreeze & summer coolant is a methanol-free formulation suitable for all engine...

Best current price£13.99from B&Q

All Offers

3 offers from £13.99 - £14.99

View price history by clicking the chart icon.

B&QB&Q - Autochem Blue Antifreeze Coolant Concentrate 2 Year Protection 1L X 2
Free delivery in 1–3 days
£13.99
Visit shop
eBayAutochem Blue Antifreeze Coolant Concentrate 2 Year Protection 1L x 2
Free delivery in 1–3 days
£13.99
Visit shop

Product Information

Full details

The Autochem Blue Antifreeze Coolant Concentrate is designed for car owners seeking reliable, year-round engine protection. Its key benefit is providing up to two years of protection against freezing and corrosion for all engine types, thanks to its methanol-free, anti-corrosion additive formulation. A minor caveat is the need for precise dilution with water to achieve optimal performance in different temperature conditions.

All features

Model Part NumberAUTOB2L
BrandAutochem

Extended Product Information

FAQs

How often should I change the Autochem Antifreeze?

The Autochem Blue Antifreeze Coolant Concentrate provides protection for up to 2 years. It is recommended to check the level regularly and top up as needed with a correctly mixed solution.

Can I mix this antifreeze with other brands?

While it is methanol-free, it is best practice to avoid mixing different brands or types of antifreeze to ensure optimal performance and prevent potential reactions or reduced effectiveness. If topping up, use the same Autochem product mixed to the same ratio.

What is the correct dilution ratio for winter protection?

For general winter conditions, use a 33% v/v solution (1 part antifreeze to 2 parts water). For optimum protection down to -18°C, use a 50% v/v solution (1 part antifreeze to 1 part water).

Is this antifreeze safe for all types of engines?

Yes, the Autochem Blue Antifreeze Coolant Concentrate is specifically formulated to be methanol-free and suitable for all engine types.

What does BS6580:2010 mean?

BS6580:2010 is a British Standard that specifies the requirements for antifreeze coolants. Conforming to this standard indicates the product meets certain quality and performance criteria.

What should I do if I spill the coolant on my car's paintwork?

If neat fluid is spilt on paintwork, rinse the affected area off immediately with plenty of water to prevent potential damage.

Troubleshooting

Engine overheating in summer

Ensure the correct 50% v/v solution was used for summer conditions, or check for blockages in the cooling system.

Coolant freezing in winter

Verify that a 50% v/v solution was used for temperatures down to -18°C. A 33% solution may not be sufficient for extreme cold.

Rust or corrosion observed in the cooling system

Ensure the product is within its 2-year service life. If symptoms persist, a complete system flush and refill might be necessary.

Antifreeze level drops unexpectedly

Check the cooling system for leaks in hoses, pipes, or the radiator. Address any identified leaks before topping up.

Pros and Cons

Pros

  • Provides comprehensive year-round engine protection.
  • Offers an extended service life of up to 2 years.
  • Methanol-free formula enhances compatibility and safety.
  • Includes anti-corrosion additives to protect engine components.
  • Meets BS6580:2010 standard for quality assurance.

Cons

  • Requires accurate dilution with water for optimal performance.
  • Spilled fluid needs immediate rinsing from paintwork.
  • Regular checks of antifreeze levels are recommended.

Setup, Compatibility & Care Instructions

Setup:

  1. Drain and Flush: Begin by draining the existing coolant from the system and flushing it thoroughly with clean water.
  2. Inspect System: Check all hoses, clips, and joints for leaks, tightening or replacing as necessary.
  3. Determine Capacity: Refer to your vehicle manufacturer's handbook to find the total volume of the cooling system.
  4. Add Water: Pour 1.5 liters of clean water into the radiator system.
  5. Add Antifreeze: Add Autochem antifreeze to achieve the desired concentration (33% or 50% of the total system capacity).
  6. Top Up: Fill the remainder of the system with clean water to the recommended level.
  7. Replace Cap: Securely replace the radiator cap.
  8. Bleed System: Run the engine until it reaches normal operating temperature to remove any airlocks. Switch off, allow to cool, and top up with water if necessary, then replace the cap.

Compatibility:

  • Suitable for all engine types.
  • Methanol-free formulation enhances compatibility.

Care:

  • Spills: If neat fluid is spilt on paintwork, rinse off immediately with plenty of water.
  • Regular Checks: It is recommended to check antifreeze levels regularly.
  • Top-Ups: If a top-up is necessary, use Autochem antifreeze mixed to the same solution as previously used.
  • Storage: When not in use, store the product in a secure, upright position.

Price History

DatePrice
Visit shop