Bonda Décor Fill Styrene Free 2 Part Wood Filler - White
Best current price£14.00from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£14.00Visit shop B&Q - Décor Fill Styrene Free 2 Part Wood Filler Rapid Hardening 500G
Visit shopB&Q£14.00Visit shop One Offer
1 offer from £14.00
View price history by clicking the chart icon.
B&QB&Q - Décor Fill Styrene Free 2 Part Wood Filler Rapid Hardening 500G
Free delivery in 1–3 days
£14.00
Visit shop
Product Information
Full details
The Bonda Décor Fill Styrene Free 2 Part Wood Filler is designed for decorators and DIY enthusiasts needing a fast-setting, versatile filler. Its key benefit is the rapid hardening and non-tack surface, allowing for quick sanding and painting. A potential caveat is the need for proper mixing of the two components to ensure optimal performance.
All features
| Colour | White |
|---|---|
| Model Part Number | BONDFSF500 |
| Brand | Bonda |
Extended Product Information
FAQs
What is the working time after mixing the two parts?
The working time is typically short due to the rapid hardening formulation. Always refer to the product packaging for the exact time, but generally, you should use the mixed product within a few minutes.
Can I use this filler on exterior surfaces?
While it adheres to various materials, its suitability for exterior use depends on the specific application and exposure to elements. Ensure it is properly sealed and painted for protection against moisture and UV if used outdoors.
How thick can I apply the filler in one go?
For best results and to prevent shrinkage or cracking, it is recommended to apply Bonda Décor Fill in layers for deeper fills. Check the product’s technical data sheet for specific maximum layer thickness recommendations.
What surfaces is this filler suitable for?
It is designed for use on wood, metal, concrete, and GRP (Glass Reinforced Plastic).
Can I paint over the filler?
Yes, once fully cured and sanded smooth, the filler can be painted over with most standard primers and paints.
Is this filler waterproof?
The filler itself is not inherently waterproof. Once cured and painted with a suitable exterior paint, it can offer protection against water ingress, but it is not designed for submersion.
How should I store the unused components?
Store each component in its original, tightly sealed container in a cool, dry place, away from direct sunlight. Ensure they are stored separately.
Troubleshooting
Filler not hardening or hardening too slowly.
This is likely due to an incorrect mixing ratio of the two components. Ensure you are measuring and mixing precisely according to the manufacturer's instructions. Check that the hardener is still effective and has not expired.
Filler remains tacky after extended period.
Improper mixing or environmental conditions (e.g., excessive humidity, low temperature) can affect curing. Ensure the correct ratio was used and that the application environment is suitable.
Filler shrinks or cracks after application.
This can occur if applied too thickly in one application. For deep repairs, apply in layers, allowing each layer to partially cure before adding the next. Ensure the surface is properly prepared and free from dust or contaminants.
Difficulty sanding the cured filler.
Ensure the filler has fully cured before attempting to sand. If it's still too hard, you may have over-hardened it, possibly due to an incorrect mixing ratio or ambient temperature. Use appropriate grit sandpaper.
Pros and Cons
Pros
- Fast curing time speeds up project completion.
- Non-tack surface simplifies sanding and finishing.
- Versatile adhesion to multiple materials.
- Styrene-free formulation for improved user safety.
- Good for detailed work due to its consistency.
Cons
- Requires accurate mixing of two components.
- Limited working time once mixed.
- May not be suitable for very large, deep repairs without multiple applications.
- Can be difficult to remove once fully cured if applied incorrectly.
Setup, Compatibility & Care Instructions
Setup: This is a two-part filler that requires mixing. Ensure you have a clean, flat surface for mixing and appropriate tools (e.g., putty knife, mixing board). Always refer to the product packaging for the precise mixing ratio of the base and hardener, as accuracy is crucial for proper curing.
Compatibility: Bonda Décor Fill is designed for use on wood, metal, concrete, and GRP (Glass Reinforced Plastic). It is generally compatible with most standard primers and paints once fully cured. Test compatibility with specialized coatings in an inconspicuous area.
Care: Store the product in its original, tightly sealed container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure both components are stored separately and correctly. Clean tools immediately after use with appropriate solvent if needed, as the filler becomes difficult to remove once hardened.